hybrid question

[ShiftMX91]

i got a blaster rolling chassis and i am wodering should i put a125 or a 250 in it? im worried that the 125 wont give enough power to pull the quad good enough? any ideas would be great

[Glamis400ex]

PM QuadJunkies. She has a blaster hybrid that her daughter races. She could tell you.

[Slinky]

Originally posted by ShiftMX91
i got a blaster rolling chassis and i am wodering should i put a125 or a 250 in it? im worried that the 125 wont give enough power to pull the quad good enough? any ideas would be great
if you put an 85 in it there would be more power than that blaster motor puts out....a 125 would definately be a good motor to drop in. You'll have to do some rubber mounting though, those motors vibrate like crazy in a quad frame.

like glammis said, PM QuadJunkies, her daugthers quad is a very nice setup.

[ShiftMX91]

Originally posted by Slinky
if you put an 85 in it there would be more power than that blaster motor puts out....a 125 would definately be a good motor to drop in. You'll have to do some rubber mounting though, those motors vibrate like crazy in a quad frame.

like glammis said, PM QuadJunkies, her daugthers quad is a very nice setup.
i am definatly rubber mounting it, thanks guys

[pb_paulie_b]

Bah go with a 250 and you will never wonder what if?

[ShiftMX91]

Originally posted by pb_paulie_b
Bah go with a 250 and you will never wonder what if?
hahaha very true

[QuadJunkies]

What size is the rider who will be on it ? Slinky iscorrect on power. A highly modded Blaster rips too but the mini motors can pull power as well..
Ive seen the 125 race actually .
We have a modified 85 bumped to a 90cc and produces 27HP.
Just make sure you do your homework so that the build will all fall into place. :)
The key is to buidling a rock solid motor. Make sure you put a stronger rod in it pulling all the added weight.
its alot of work but can be rewarding!:scary:

[ShiftMX91]

i decided to go with the 250 i got the frame on saturday now i am ordering up all the parts i need. i am getting a yz 250 motor in a few weeks

[QuadJunkies]

Is the 250 counter balanced?
Good luck to you, I cant wait to see it when its done!:macho

[ShiftMX91]

Originally posted by QuadJunkies
Is the 250 counter balanced?
Good luck to you, I cant wait to see it when its done!:macho
yes it is, and thank you

Does anyone know what other quad a arms i can put on the blaster to make it wider without doing any work to the frame?

[QuadJunkies]

Originally posted by ShiftMX91
yes it is, and thank you

Does anyone know what other quad a arms i can put on the blaster to make it wider without doing any work to the frame?
We converted everything on ours to 400ex and use Laeger both front and rear end.
I can show you some shots if you like?

[ShiftMX91]

Originally posted by QuadJunkies
We converted everything on ours to 400ex and use Laeger both front and rear end.
I can show you some shots if you like?
yeahh that would be great! does the 400ex a arms just bolt right up?

[QuadJunkies]

hmm.. wish I had some better pics but this is all I have right now.
http://www.pbase.com/quadjunkies/image/73144979.jpg
http://www.pbase.com/quadjunkies/image/75798625.jpg
http://www.pbase.com/quadjunkies/image/75798635.jpg
rear end
http://www.pbase.com/quadjunkies/image/75798632.jpg
http://www.pbase.com/quadjunkies/image/75798627.jpg

[QuadJunkies]

hmm.. wish I had some better pics but this is all I have right now.
http://www.pbase.com/quadjunkies/image/73144979.jpg
http://www.pbase.com/quadjunkies/image/75798625.jpg
http://www.pbase.com/quadjunkies/image/75798635.jpg
rear end
http://www.pbase.com/quadjunkies/image/75798632.jpg
http://www.pbase.com/quadjunkies/image/75798627.jpg
http://www.pbase.com/quadjunkies/image/73144981.jpg

[QuadJunkies]

ooops my bad, sorry they are so large :o

[ShiftMX91]

did the 400 a arms bolt right up? or did u have to do work to the frame

[#22blaster240]

THERE IS A BLASTER WITH A YZ250 MOTOR ON EBAY RIGHT NOW. IT LOOK PRETTY KOOL AND ALL.

[#22blaster240]

THERE IS A BLASTER WITH A YZ250 MOTOR ON EBAY RIGHT NOW. IT LOOK PRETTY KOOL AND ALL. HERE IS A LINK: http://cgi.ebay.com/ebaymotors/YAMAHA-BLASTER-200-YZ250-Conversion-custom_W0QQitemZ270110483388QQihZ017QQcategoryZ672 5QQrdZ1QQcmdZViewItem

[ShiftMX91]

yea thats sick but i am finishing mine and everything im getting a lot of extras that looks pretty much all stock just the motor

[QuadJunkies]

Originally posted by ShiftMX91
did the 400 a arms bolt right up? or did u have to do work to the frame
There is lots of A-Arms you can chose from, I would ask around in the Blaster section for others who have set ups
no, you dont have to modify the Frame any, just gussets would be good.
How big is the rider?
I should say they are 400ex style as because we used 400ex spindles and hubs. ;)

The ergonomics on a 400ex are much better than a Blasters,so Im thinking Laeger obviously made 400ex style instead of sticking with Blaster parts. I could be wrong but it makes sense.

[QuadJunkies]

Originally posted by #22blaster240
THERE IS A BLASTER WITH A YZ250 MOTOR ON EBAY RIGHT NOW. IT LOOK PRETTY KOOL AND ALL. HERE IS A LINK: http://cgi.ebay.com/ebaymotors/YAMAHA-BLASTER-200-YZ250-Conversion-custom_W0QQitemZ270110483388QQihZ017QQcategoryZ672 5QQrdZ1QQcmdZViewItem
Theo nly thing about that is you dont know what your getting. That motor could be total junk as well as the frame.Trust me from my own experience.
There are great deals out there but IMO your better off building your own so you know what your getting for the end result.

[ShiftMX91]

Originally posted by QuadJunkies
There is lots of A-Arms you can chose from, I would ask around in the Blaster section for others who have set ups
no, you dont have to modify the Frame any, just gussets would be good.
How big is the rider?
I should say they are 400ex style as because we used 400ex spindles and hubs. ;)

The ergonomics on a 400ex are much better than a Blasters,so Im thinking Laeger obviously made 400ex style instead of sticking with Blaster parts. I could be wrong but it makes sense.
I am about 5'6 120 pounds i have riden 250rs no problem and right now i am on a yz 125 and throw that around, i just need the front set up for the frame than im all ready to find the motor and everything. So yea i will look in the blaster section