What 400 ex parts will fit on a dale [Archive]

View Full Version : What 400 ex parts will fit on a dale

K_Fulk

10-10-2002, 10:48 AM

I'm pretty sure my pep shocks will fit on one. but how about axles and hubs and stuff?

....by the way look for my 400ex in the new cycle trader this week

lil400exman

10-10-2002, 11:32 AM

ohh man no!!!! we lost a honda man!:eek: :mad: :grr go away and nevercome bak! no jjust kiddin hubs bars plastic from 400ex to cdale a 440ex would do better.........:D

Hey Koolaid

10-10-2002, 01:03 PM

Mine is stock but I know a guy that has 400EX tie rods.

10-10-2002, 01:28 PM

shocks are swappable too,,I've seen it first hand..and yes tie-rods too and ends i believe..

Pappy

10-10-2002, 01:29 PM

front shocks will......but rear?

slates74

10-10-2002, 07:27 PM

I dont believe the rear will fit, the linkages, or the no link in c-dales case, will not match up.

10-11-2002, 03:05 PM

Hubs are the same pattern. Wheels will interchange.

AlaskaSpeed

10-11-2002, 03:49 PM

tie rod ends won't work with the stock stem setup. They don't have clearance. Houser makes a stem that allows you to run the trx style tie rods and ends. front shocks swap, rear sprocket swaps, wheels are right bolt pattern but not the same offset, and 250R a-arms have the same measurements at the mounts...just not sure about the ball joints/spindle fit, haven't tried it yet.........................JIM

Sick0

10-13-2002, 02:27 PM

I know you can 400ex a-arms if you have the spindles off 400 because they use 250r style spindals. I heard the axle fits. The handlebars will fit.
I have a friend that mounted a 250f pipe on one. I don't klnow if that some hot set up or not but its faster than stock.

K_Fulk

10-15-2002, 12:17 PM

Thanks for the info guys.

josh

10-15-2002, 05:56 PM

y in the **** would you want to put something off a honda on a cdale, jus wanderin cuz they build like the best stuff, unless it's standard and you have some really really nice parts for it

Godspeed

10-16-2002, 06:51 AM

I was thinking about putting a Honda sticker on my Dale but also the numbers 2004 before it. As a joke. You know 2004 Honda. My friends are hoping that Honda comes out with a 2004 racer.

K_Fulk

10-18-2002, 02:29 PM

Well i got some pep shocks that i could put on a dale. About 3 sets of wheels and tires. And i'm hoping my rpm front hubs will fit on a dale. And if i'm lucky my laeger a-arms and rpm axle will fit too. I wanted to know what all would work before i started selling all my after market parts.
I'm glad c-dale copied a lot of honda stuff it makes things a little easier

AlaskaSpeed

10-18-2002, 03:58 PM

I know I saw an FX 400 that installed a 250R axle, but he had to "make" it work. I know it can be done, just not sure of what is involved....JIM

Sick0

10-18-2002, 04:48 PM

I wonder if the stering stem will fit.

suzuki Z400

10-18-2002, 05:11 PM

A C front bumpers have the same bolt pattern i guess all bumpers would.

Sick0

10-18-2002, 05:18 PM

Yeah I've heard the bumper fits to.