splines aren't fine

[togup]

my splines on my stock axle and wheel hubs wore out so i bought new hubs and an aftermarket axle its been about 2 years now my hubs are worn out again, is this normal or what?

[Rip_Tear]

defiantely not, my stock ones are 6 years old now and aren't warn much at all. What kind of conditions do you ride it? Do you grease the splines?

[4TraxRider]

Put a light layer of grease on the splines when you put them on and make sure you axel nuts are tight at all times.

[Barrymaxx]

Your hub nuts are coming loose. When there loose, then the hubs have a little play. That turns into big play, then it strips.

Get new hubs and axle and torque them properly. Then keep an eye on it.

[rescue6]

I always replace the nuts W/ Nylon lock nuts and also use Red locktite

[esr250r86]

Originally posted by Barrymaxx
Your hub nuts are coming loose. When there loose, then the hubs have a little play. That turns into big play, then it strips.

Get new hubs and axle and torque them properly. Then keep an eye on it. Yeah, thats what I would do. Definitely keep an eye on the hub nuts. They are always coming loose.

[drag93ex]

yea grease the splines when you get a new axle and hubs. it eliminated the play for me as long as you torque proberly.