PDA

View Full Version : help



lundgrener02
04-03-2007, 01:39 PM
ok so i'm sure you guys here have heard this a million times but my friend has a kfx700 and we just put a white bro's pipe on it and we need to jet it, so i have no idea how it is done on this bad boy. i just know you have to change two jets and it seems like i read one is larger than the other.

any directions to a place where someone has done this and has a "how to" on this would be awesome.

oh and if you have any ideas on a good starting point with jets let me know. its a white bro's carbon pro full system, we will do some mods to the air box for more air flow.

thanks for any help.

ibthegator
04-04-2007, 05:46 AM
all the info you need at kawieriders.com
and do not forget to shim the needles with a #4 brass washer

If you remove the boot over the belt cover you can access the bottom of the carbs without removing them.
Very simple and quick.
I have mine set at 195front-198rear and one shim under each needle at around 500 feet above sea level.
Also do the 12 1" holes in the airbox.
It is a new beast.

lundgrener02
04-04-2007, 09:29 AM
alrighty thanks man.

KTM265
04-04-2007, 07:54 PM
Is this a stock motor or do you have some other mods done?