tie rods and lsr a arms???

[j450rking]

i have lsr +2 a arms and i have the tie rods that came with them but they seem to be to long is the another ajustment that i have to do besids the tie rod ends i adjust the tie rod ends all the way in and the hubs are still pointing in to the front please! somebody help me!!!

[Scro]

Do you have the tierod ends on the bottom of the steering stem? I have mistakenly done this in the past, and the front end was all out of whack. Other than that, it seems like you have the wrong size tierods.

[j450rking]

i put the end under the steering stem plate and not on top?

if so i will have to try that

[esr250r86]

No, for a 450r you put the tierod end on top of the steering stem plate and on the bottom of the spindle mount.

[j450rking]

so do i put the tie rod end on the top or bottom of the spindle mount?

[esr250r86]

You put it on the bottom of the spindle mount.

[Scro]

Originally posted by esr250r86
No, for a 450r you put the tierod end on top of the steering stem plate and on the bottom of the spindle mount.

This is correct. I guess my post was a little confusing.

[j450rking]

so they bolth mount on the bottom? just so i am 100% shur

[esr250r86]

No. The tie-rod end that goes on the steering stem plate mounts on top of the steering stem plate and the tie-rod end mount on the spindle mounts on the bottom of the spindle. Does that make sense? If not I could get a pic for you.

[j450rking]

i understand and thats what i was doing so i will have to get ahold of the guy i got them from and see if a gave ma the wong tie rods thanks guys

[j450rking]

hey do you guys know the langth of the plus +3 and the +2 tie rods?

[j450rking]

oh it's a 400ex just so you know idk if that makes a diference or not

[esr250r86]

I wouldnt know the length of them. But i will find out later today because a friend has some plus two's. By the sounds of it, I think you got some +3's and you need some +2's.

[j450rking]

i got ahold of the guy i got them from and he said that he sent me the +3 and he sent another guy the +2's so i have to send back the plus 3s and i'll get the plus 2s so thats what is wrong thanks for all the info guys!

[j450rking]

hey esr250r86 whats that atv riders patron thing?

[esr250r86]

No problem, yeah, I ordered some tierods they other day but had a different problem. I got the box at my house and open it, and there were no tie-rods inside. So I called them back up and they told me to look on the side of the box if there were any holes so I looked and sure enough there was a hole big enough for two tierods to squeeze through. Got some new ones sent back to me though. Good luck.

[esr250r86]

The atvriders patron is when you donate some money to exriders.com and you become a supporting member and they give you the patron badge. Just donate some money to them and you will get it in like a few days. Makes your profile look cool too.:D

[j450rking]

ok cool thanks