esr 330pv coolant leak

[louis]

Hello,I just purchased a new 330pv from esr and just started it and rode down the road and back. The cylinder was was leaking coolant down the side. So I replaced the o-ring and that was still not the problem. Only to find that on the left side 1/8 inche down from the head on the water jack there is a small hole leaking coolant on the side of the cylinder. Any one else have this.
or is this a defective cylinder.

[trailwart]

i had that on my esr 330pv. didnt worry cause it was a seapage type thing, not pouring or squirting out. i had it fixed when i sent it to neil (cleigh). he did my porting and hooked me up on the leak. i had heard that some of these cylinders are like this because there poris or somthin like that(casting process)

[C-LEIGH RACING]

Have you checked back with where ever you bought the cylinder kit from for replacement.
That cylinder casting leaking like that on a new cylinders not your problem & should be replaced, if you bought it new from a company.
Neil