need more lowend!!

["THE ShoP"]

what would you guys recomend a 416 or a 426?what cam, piston?I ride xc an climb some hills so I'm all about the lowend. any input would be great.

[milburn]

me too,everone allways say 400s have lots of low end but i need more and top end too. i think mines best in the middle rpms

[xben719]

I would put in a 416 with a stage 1 hot cam. I wouldn't go over 11:1 compression so you can run pump gas. I have this set up and it has proven very reliable. Also make sure you take the time to set up your carb right after you install everything.

[Selland74]

I have a stg 1 hotcams and it has great low end. i can actually slow down on a hill climb for curvy trails and keep going very easily.

[troutman561]

Have you tried dropping a tooth on the front sprocket?

["THE ShoP"]

Originally posted by troutman561
Have you tried dropping a tooth on the front sprocket?

yea I already did that. I just wanna sqweez some ore power out of the thing,It just dosn't have the get up an go I want

[troutman561]

Well before going into the engine possibly try the 13 tooth front sprocket, thats what I run on mine, top end sucks but I ride tight trails for the most part and its great. It will make a difference. But if that doesn't satisfy I guess the high comp piston/cam combo will suit you well...