PDA

View Full Version : what do i need to do



400excaleb
03-30-2007, 12:01 PM
its been burning a lot of oil for a while and it just hardley smokes at decel, and i can start it up for 10 sec. and put my hand behind the pipe and it will spit oil out. what do i need to do. does it need just valve seals or rings or what

Ruby Soho
03-30-2007, 12:20 PM
did you do any mods to it? and then this resulted in it? or did it jus start spitting oil?

vett_09
03-30-2007, 01:32 PM
How many hours are on that motor? Mine did the same thing when my rings went.

400excaleb
03-30-2007, 03:18 PM
nothing but pipe and filter, so u think it is best for me to change rings and valve seals

Barrymaxx
03-30-2007, 05:03 PM
Yeah, rings and seals and new gaskets should solve your problem. Inspect the valves for anything unusual while you have the head off.

400excaleb
03-30-2007, 06:48 PM
how hard is it to do that myself. i have good mechanical skills so if i buy a service manual is it pretty easy to do.

dariusld
03-31-2007, 08:51 AM
I can't believe a 2005 is spitting oil, or has ring problems, or valve seal problems:huh How much oil do you have to add after a ride?

400excaleb
03-31-2007, 11:18 AM
well i went and rode for 7 hours last weekend and had to add 1\2 quart

troutman561
03-31-2007, 11:54 AM
Did you re-jet after the pipe and filter?

400excaleb
03-31-2007, 12:24 PM
yes i did, the plug looks perfect

400exMO
03-31-2007, 01:56 PM
yeah rings are bad. I'd check everything else like others said while it's apart.