PDA

View Full Version : Jetting carb


gixxerfreak01
03-27-2007, 05:28 PM
I have a 2004 450r with a slip on hmf bill balanace exhaust, K&N filter and no air box lid.
Im running a 185 main, 50 pilot, air/fuel screw 2 1/2 turns out and stock needle.
I was wondering if that sounds right.
03-28-2007, 09:38 AM
Sounds about right to me.
400exrider707
03-28-2007, 09:43 AM
I would probably lower the main, 4th clip down on the needle....

EDITED
03-28-2007, 09:50 AM
carefully re-read his post, his air screw is 2.5 turns out...and he has the stock needle
400exrider707
03-28-2007, 11:16 AM
Originally posted by speedyquad
carefully re-read his post, his air screw is 2.5 turns out...and he has the stock needle

good call... I'll edit my retardedness...
gixxerfreak01
03-28-2007, 03:26 PM
thank you for the help i was just making sure.