Jetting carb

[gixxerfreak01]

I have a 2004 450r with a slip on hmf bill balanace exhaust, K&N filter and no air box lid.
Im running a 185 main, 50 pilot, air/fuel screw 2 1/2 turns out and stock needle.
I was wondering if that sounds right.

Sounds about right to me.

[400exrider707]

I would probably lower the main, 4th clip down on the needle....

EDITED

carefully re-read his post, his air screw is 2.5 turns out...and he has the stock needle

[400exrider707]

Originally posted by speedyquad
carefully re-read his post, his air screw is 2.5 turns out...and he has the stock needle

good call... I'll edit my retardedness...

[gixxerfreak01]

thank you for the help i was just making sure.