xcracer416
03-27-2007, 11:33 AM
ive had the rekluse since the quad was new 2005 yfz. i race xc with it, never really liked the rekluse so i decided to make it back to factory cable pull. ive put clucth kits in my 250r and 400ex before so its nothing new to me.
my problem is i put all of the friction plate and steel plates with heavy duty springs in it, now the clucth rod wont even touch the pressure plate when i have the clutch pulled all the way in.
ive looked for extra shims and and even if the ball was in there. i cant find anything that would cause this problem. i went to rekluses web site and looked at there manual to install it. i went in reverse order taking it out and installing my factory set up.
what can i look for that i havent metioned. i have a new clutch cable, factory perch, new dp kit (w/ heavy duty springs) factory pressure plate.
my problem is i put all of the friction plate and steel plates with heavy duty springs in it, now the clucth rod wont even touch the pressure plate when i have the clutch pulled all the way in.
ive looked for extra shims and and even if the ball was in there. i cant find anything that would cause this problem. i went to rekluses web site and looked at there manual to install it. i went in reverse order taking it out and installing my factory set up.
what can i look for that i havent metioned. i have a new clutch cable, factory perch, new dp kit (w/ heavy duty springs) factory pressure plate.