sprocket

[culichi]

does anyone know the ltr sprocket size?

14 front 38 rear

[culichi]

thanks!!

[davidfrederick]

stock sprockets for ltr 450 14 in the 36 in the rear and gearing combo is 2.57:devil:

[culichi]

what sprocket size would you use? because i want to change my sprockets but im confused :confused:

[davidfrederick]

what do want to do. and are you riding in sand or dirt.

[culichi]

I ride both but i do more sand

[davidfrederick]

well are you a big guy or little guy, the smallest i would go in the front would be a 13 and you want bigger in the back. the smaller you go in the front you take the risk of braking your chain. im a big guy i run a 13 in front and a 40 in back. the gearing on that is 3.08.

[culichi]

im a small guy

[davidfrederick]

If your going to be riding in the sand. i would get a 13tooth in the front and if you want more get a bigger in the rear. my friend has a 12 tooth in front and stock in the rear and his about 230lbs and you know what i have and we beat alot of bike at sand mountain.

[madsteam]

same ? here need help. Runs real good stock with 18s for me, but when i put paddles on it it bogs down real bad in 4th. I'm 230# do i change the front or back to get the same feal like the 18s. What size would u recomend front and back thanks.

I'm confused sprockets and gearing. I read the post but i cant understand what to change rear or front:confused:

[davidfrederick]

the smaller you go in front you gain torque and lose topend and the bigger you go in the rear you gain torque. if you drop a tooth in the front its like adding 2 teeth in the rear.