PDA

View Full Version : CT racing motor


Joe400ex
03-24-2007, 03:36 PM
i have purchased a motor built by CT racing. I took it part and it has a ROSS racing piston. The bore size is a 3.465 and on the piston it says 88mm. And i have another piston and all the valve springs say KCY or KYC on it. Would u be able to tell me what size bore this is. Also what are the hotcam specs on a stage 1 and 2. because he gave me a cam and told me it was a hot cam so i didnt know what kind it was or even if it was one.
thanx
joe400ex
300EXrider356
03-24-2007, 03:46 PM
I'm pretty sure the bore size is a 426, and I also think that hotcams have there logo stamped into part of it, can someone help me on this one?
Joe400ex
03-24-2007, 03:49 PM
bump
Joe400ex
03-24-2007, 06:59 PM
...
416exriden
03-24-2007, 07:10 PM
yea hotcams has their logo on all their cams
flauge
03-25-2007, 10:12 AM
Im pretty sure if yu have a stg 2 it should have 8 JHT etched somewhere on it. I forgot what my stg 1 said on it , its been a little while scince i put it in. Hope that helps;)
Wheelie
03-25-2007, 10:25 AM
You have a 426, and most likely a HC stg 2.
Ruby Soho
03-25-2007, 10:28 AM
hotcams has there logo on it

and there model # which you can find at hotcams website
03pissedoff426
03-25-2007, 11:35 AM
the stuff with KCY/KYC is all factory stuff