orca0294
03-20-2007, 07:41 PM
http://img256.imageshack.us/img256/4034/dsc00187hq4.jpg (http://imageshack.us)
Prices Negotiable!
Suspension
ASR +3+1 A-Arms
Elka Compression adjustable (piggyback) 190LB MX Set up
+3 Brake Lines $950
Elka Rear Shock Compression & Rebound Adjustable 130LB on Stock Swinger (remote)
The Rezzie can was hit by the chain knocking off the nob (must use a screw driver) and denting the rezzie .. It does not leak anything and is covered with a red bull can! If you can not handle that it has this wear please do not buy but it is in working order! Elka claimed it would cost around $250 for it to be rebuilt and for a new rezzie can cover.
$440
G-Force Axle +2/+4
-Straight with 10-12 hours on it $130
Motor
2001 Yamaha Blaster Motor
6-8 Hours
Milled Head for 93 Octane Gas
MX Port (estimated 27-30HP with LRD Pipe and Uni Filter)
New Crank, Piston, Bearings, seals THE WHOLE WORKS
Ported by reputable blaster motor builder
Polished Side Yamaha Side cover
14 tooth sprocket
Every Bolt replaced with allen heads
I ran this motor with a toomey pipe, Uni Filter, Stock Carb, and Boysen Reeds; it ripped from the bottom end all the way to the top end! I put this ebay several months back and after 2 days it was at $750 so it may go back on there.
$825
Tires/Rims
Kenda MXF Front Tires 19" on .190 Douglas Rims - $130
Kenda MXF Rear Tires 18" on .190 Douglas Rims $130
Pipe/Air Filter
Toomey Pipe and Silencer With Uni Air Filter - $250
10-15 Hours of use
Chrome
Plastics
2003 full set of plastics in Good conditions normal wear for their year $180
More to be added soon!
Suspension and motor must be sold before any little items otherwise.. $3200 OBO for the complete quad
If you are interested in any other pictures reply!
Prices Negotiable!
Suspension
ASR +3+1 A-Arms
Elka Compression adjustable (piggyback) 190LB MX Set up
+3 Brake Lines $950
Elka Rear Shock Compression & Rebound Adjustable 130LB on Stock Swinger (remote)
The Rezzie can was hit by the chain knocking off the nob (must use a screw driver) and denting the rezzie .. It does not leak anything and is covered with a red bull can! If you can not handle that it has this wear please do not buy but it is in working order! Elka claimed it would cost around $250 for it to be rebuilt and for a new rezzie can cover.
$440
G-Force Axle +2/+4
-Straight with 10-12 hours on it $130
Motor
2001 Yamaha Blaster Motor
6-8 Hours
Milled Head for 93 Octane Gas
MX Port (estimated 27-30HP with LRD Pipe and Uni Filter)
New Crank, Piston, Bearings, seals THE WHOLE WORKS
Ported by reputable blaster motor builder
Polished Side Yamaha Side cover
14 tooth sprocket
Every Bolt replaced with allen heads
I ran this motor with a toomey pipe, Uni Filter, Stock Carb, and Boysen Reeds; it ripped from the bottom end all the way to the top end! I put this ebay several months back and after 2 days it was at $750 so it may go back on there.
$825
Tires/Rims
Kenda MXF Front Tires 19" on .190 Douglas Rims - $130
Kenda MXF Rear Tires 18" on .190 Douglas Rims $130
Pipe/Air Filter
Toomey Pipe and Silencer With Uni Air Filter - $250
10-15 Hours of use
Chrome
Plastics
2003 full set of plastics in Good conditions normal wear for their year $180
More to be added soon!
Suspension and motor must be sold before any little items otherwise.. $3200 OBO for the complete quad
If you are interested in any other pictures reply!