any info on cam install

[ZSNOW]

i bought a hot cam my dad says its to hard to put in....any help?

[sportrax stu]

go on the hot cams website and they should have instructions on there which should help alot
if u got any more questions jus ask
regards stu

[PismoLocal]

If you have basic handtools, average mechanical knowledge, and some feeler gauges to check valve clearance you should be able to install the cam your self with the instructions. Its not rocket science just follow the directions step by step its kind of like legos.

[ZSNOW]

ok , anything else i should know before i jump into this project? don't wanna end up with my motor all over the trail someday haha

[DF400ex]

I just installed my Hotcams Stage 2 last night. It was really easy. I have had no experience with 4-strokes just 2-strokes before doing this. It was pretty easy actually. I have a service manual which helped.

The power increase was huge. My valves were really out of adjustment cuz it's a 99, so after the new cam and properly adjusted valves my quad kicks. I actually have a top end now and it pulls hard from idle to red line.