PDA

View Full Version : Where to gusset a DRX?



GNCC GROVE
03-19-2007, 06:45 PM
Does anyone know where to gusset a DRX? Some pictures would really help. I have access to material and a Tig welder, so I just need to know how thick and where.

Logan #34's Dad
03-19-2007, 09:50 PM
The first place you need to gussett should be between the vertical frame rail where it meets the upper frame under the seat. Trying to explain further - above the swing arm bolt follow the frame up till it meets the top frame rails and gusset there. My son broke his frame in half there - Alot of weight and pressure on that top frame rail. I think I used 1/8 inch plate steel cut into triangles.

QuadJunkies
03-20-2007, 01:49 AM
I posted several spots we welded learning from our last two minis where the breaks seemd to be the worst spots.
Hope this helps.
http://www.exriders.com/vbb/showthread.php?s=&threadid=280343

Livin4Real
03-20-2007, 01:16 PM
Also try and use tubing if possible instead of plates so it doesn't focus the energy in one line where you weld.