stalefish_132
03-18-2007, 08:18 PM
I'm not quite sure that i have my FCR39mm set up exactly right, mods include wiseco 11:1 89mm, hot cams stg. 2 (old), full exhaust and no air box lid with UNI filter.
my jetting is
188 main
52 pilot
needle set on lowset setting
not quite sure on the air/fuel screw.
my elevation is 1500ft to 5500ft but for the most part its 1500ft to 2500ft.
generally temps between 68*F to 86*F but moastly around 72*ish.
i know this is quite a wide temp. and elevation range but what i'm mostly after is tips on ajusting the air fuel screw. i've serched aroudn and havn't really foudn what i'm looking for, i think i'm running a little lean on the pilot and maybe a bit rich on the main, my plug looks like a darkish brown. any FCR guru's kicking around?
my jetting is
188 main
52 pilot
needle set on lowset setting
not quite sure on the air/fuel screw.
my elevation is 1500ft to 5500ft but for the most part its 1500ft to 2500ft.
generally temps between 68*F to 86*F but moastly around 72*ish.
i know this is quite a wide temp. and elevation range but what i'm mostly after is tips on ajusting the air fuel screw. i've serched aroudn and havn't really foudn what i'm looking for, i think i'm running a little lean on the pilot and maybe a bit rich on the main, my plug looks like a darkish brown. any FCR guru's kicking around?