clutch adjustment

[400exrider989]

i dont like the way my clutch is right now...
its hard to explain but ill try my best.
ok so i pull in the clutch all the way. then i let it go slowly to find where it grabs and starts to go
it grabs at the last centimeter on the clutch lever...
i would like to have about 1-inch of play were i can slip the clutch then only 1-cm

i would like the clutch to grab after 1-cm of letting it out but it grabs after 1-inch of letting it out
so in other words i dont have much clutch play or slipage

hopefully you understand that if not ill try it again

thanks alot

[firefighterjosh]

So what you are asking is that you want to only have to pull in the clutch like 1 cm for it to disengage?:confused:

[400exrider989]

no im saying thats what it is right now
i want to pull it in 1inch to disengage

it ae like this from the floor...its an 07 so i ant to adjust it

[firefighterjosh]

my guess its out of adjustment. Should be about 1/8 inch play in the cable.

[400exrider989]

i dont think you get what im saying
there is 1/8 of an inch back and forth on the lever until it actually pulls back
im saying that when it starts to pull back (after that 1/8 of play in the lever) i only have 1-cm of play (in the lever) to slip the clutch. i want 1-inch of of play (on the lever to slip te clutch)

i want it to be like this:
i put it in 1st i slowly let out on the lever and after 1cm of letting out on the lever i wanted it to slip a little and the more i let out the lever the more i want it to grab
it does this:
i put it in 1st and slowly let out on the lever after 1-inch of lettin out the lever thats when it starts to grab.

so i can hardly slip the clutch

wow that took me a whole 20 min to try and figure out

[robjohn74]

is your clutch stock..

[400exrider989]

yes