mach1stang
03-17-2007, 05:44 PM
hey guys. the big thing now is race plastics but getting them to match on each side is not the easiest thing either. here is a easy way to get you plastics matching and a better looking cut.
supplys
nippers (not sure if that is what they are called)
and patience
and some sand paper
ok so now your ready to trim take your nippers and place them till edge of the plastics hits in the back and cut now go along the side of the fender when your done peel of the cut peices, and sand it down smooth with your sand paper. now you need to repeat the same process until you have the fenders the desired cut . take your time a new fender is not a cheap replacment!! this is not the fastest way of cutting/trimming but your fenders will be the same on both sides.
supplys
nippers (not sure if that is what they are called)
and patience
and some sand paper
ok so now your ready to trim take your nippers and place them till edge of the plastics hits in the back and cut now go along the side of the fender when your done peel of the cut peices, and sand it down smooth with your sand paper. now you need to repeat the same process until you have the fenders the desired cut . take your time a new fender is not a cheap replacment!! this is not the fastest way of cutting/trimming but your fenders will be the same on both sides.