rivets

[400exridin121]

how do you get out rivets? i need to repack badly and i cant get them out, is there a site that explains how to do it with pictures?

[400ex28]

Drill them out.

[400exridin121]

ive tried that i think ill just get a rivet gun

[Scott-300ex]

Rivet gun will put them in.

Drill them out to get them out.

[TheFontMaster]

You need to get a small punch, and hit out the stub in the middle of the rivet, then drill it out.

If worst comes to worst, you can take a grinder, and grind off the head.

[suzukigirl]

you need to drill it out.....rivets are a pita :p

[400exridin121]

yea i got the head of one i drilled out the center and then used a chisel and got the head off. is that right?

[suzukigirl]

thats what i would do

[54warrior]

If you use the right size of drill bit you shouldn't need a chisel at all. I drill out rivets all the time on the Super Late Model Dirt car that I help work on. It's nothing to drill at least 50 in one night at the races.

[400exridin121]

ill do the rest of them like that then thanks