May Quad of the Month entry thread.

[TheFontMaster]

This month is an open month, so anyone is free to enter. The poll will go up next saterday, so you have a week to get your quads in. Here is the link to the mods list that must be filled out and posted with your quad, and also the rules.

mods list:
http://www.exriders.com/vbb/showthread.php?s=&threadid=162941

Rules;
http://www.exriders.com/vbb/showthread.php?s=&threadid=146713

[elementryder]

Chassis | Suspension | Controls:

Frame: stock 05
A Arms: Burgard +5 LT
Swingarm: Burgard +1 3/4 LT
Steering Stem: Stock
Stbilizer: Burgard
Axle: Lonestar
Carrier: Burgard
Locknut: Rpm
Hubs F|R: Stock pc'd
Bars: Fasst Flex
Throttle/Clutch Lever: Stock/Asv
Grips: Oury
Nerfs: Ac Pc'd
Bumper: Rath
Grab Bar: Dommel Racing
Front Shocks: Axis Lt
Rear Shock: Axis Lt
Brake Lines: Streamline
Rotors F|R: stock
Rims F|R: Hiper
Tires F|R: Razr



Body:

Plastic: Blue Maier
Graphics|Seat Cover: Ceet Confeterate flag
Number Backgrounds: None
Handguards: Powermad
Bar Pad: Fasst Flex
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: TC
Bore & Stroke:
Displacement: 300
Cam: TC
Carburetor: Lectron
Air Filter|Box: K&N/ Dommel Racing
Pipe|Silencer: TC
Clutch|Plates: stock
Gearing F|R: 14/36
CDI|Killswitch: Pro Desing
Cooling: Air
Other:
Thanks to my 07 sponsors
BURGARD CYCLE
DUNCAN RACING
GT-THUNDER
HETRICK RACING
RATH RACING
EAST COAST ATV
K&K ATV

[elementryder]

2

[elementryder]

3

[elementryder]

4

[JRP]

Chassis | Suspension | Controls:

Frame: stock
A Arms: walsh +3 LT
Swingarm: stock
Steering Stem: stock
Stbilizer: stock
Axle: stock
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: tag t-2's
Throttle/Clutch Lever: stock/asv
Grips: spider
Nerfs: ac propegs
Bumper: ac stadium
Grab Bar: stock
Front Shocks: fox float evols LT
Rear Shock: stock
Brake Lines: russell +3
Rotors F|R: stock
Rims F|R: stock/hipers(dual side)
Tires F|R: 20in holeshot sx/18in holeshot sx



Body:

Plastic: stock
Graphics|Seat Cover: Cernics Racing
Number Backgrounds: none
Handguards: powermadds
Bar Pad: tag
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: stock
Cam:hotcam stg 2
Carburetor: stock
Air Filter|Box: UNI
Pipe|Silencer: DASA
Clutch|Plates: Hinson
Gearing F|R: stock
CDI|Killswitch: Gunnar
Cooling: stock
Other:
THANKS TO MY 2007 SPONSORS...
CERNICS RACING
ASV INVENTIONS
WALSH RACING
MOM AND DAD


http://i124.photobucket.com/albums/p16/jrp859/me6.jpg
http://i124.photobucket.com/albums/p16/jrp859/me5.jpg
http://i124.photobucket.com/albums/p16/jrp859/me-3.jpg
yes i know my tire is on backwards.. its fixed now:)
http://i124.photobucket.com/albums/p16/jrp859/quad-1.jpg
http://i124.photobucket.com/albums/p16/jrp859/quad.jpg

[Honda#4]

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Stock
Swingarm: Roll Design +1.25
Steering Stem: Roll Design +1
Stbilizer: None
Axle: Stock
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock
Bars: Stock Painted
Throttle/Clutch Lever: Stock/ MSR AOF
Grips: Pro-Grip
Nerfs: DG Performance
Bumper: DG Performance
Grab Bar: Stock
Front Shocks: Stock
Rear Shock: Stock
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: ITP Baja’s
Tires F|R: ITP Holshot HD’s

Body:

Plastic: Stock
Graphics|Seat Cover: Stock
Number Backgrounds: None
Handguards: Powermadd
Bar Pad: None
Fuel Tank: IMS Desert Tank

Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: Stock
Cam:Stock
Carburetor: Stock
Air Filter|Box: White Bros Powerfilter
Pipe|Silencer: White Bros E-series Slip-on
Clutch|Plates: Stock
Gearing F|R: 14/38
CDI|Killswitch: Stock/None
Cooling: OMF Air scoops

Other: Painted Footpegs,Handguard Brackets,Heatshield,Handlebars. Outerwears Shock covers. Clarke Gas tank vent tube, EBC Severe Duty brake pads, Pivot Works Bearings.

[Honda#4]

last one

[ZeroLogic]

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Stock
Swingarm: Stock
Steering Stem: Stock
Stbilizer: None
Axle: Stock
Carrier: LSR
Locknut: Stock
Hubs F|R: Stock
Bars: Renthal
Throttle/Clutch Lever:Sunline
Grips: Orgy
Nerfs: AC
Bumper: Ac
Grab Bar: DG
Front ShocksStock:
Rear Shock: Stock
Brake Lines:Stock
Rotors F|R: Stock
Rims F|R: 22s
Tires F|R: Maxxis Razr fronts and Spider Tracs for the rear



Body:

Plastic: Maier Red Race Cut and a 250r hood
Graphics|Seat Cover:Stock
Number Backgrounds: None yet
Handguards: acerbis
Bar Pad: Renthal
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Completely rebuilt with stock parts
Bore & Stroke: .40
Displacement: 296 cc I think
Cam:acerbis
Carburetor: acerbis
Air Filter|Box: UNI
Pipe|Silencer: Curtis Sparks
Clutch|Plates: EBC
Gearing F|R: Stock
CDI|Killswitch: Stock
Cooling: Air
Other:Black frame Just Rebuilt from ground up

http://i15.photobucket.com/albums/a357/zerologic/2-5.jpg
http://i15.photobucket.com/albums/a357/zerologic/2-4.jpg
http://i15.photobucket.com/albums/a357/zerologic/2-3.jpghttp://i15.photobucket.com/albums/a357/zerologic/2-2.jpg
http://i15.photobucket.com/albums/a357/zerologic/Quadasof12-9-063.jpg
http://i15.photobucket.com/albums/a357/zerologic/2.jpg
http://i15.photobucket.com/albums/a357/zerologic/2-1.jpg

[Mxjunkie]

Piece of junk to a xc ride

Chassis | Suspension | Controls:

Frame: Stock Painted burgundy
A Arms: Stock painted-
Swingarm: Stock painted-
Steering Stem: Stock
Stbilizer: Stock
Axle: Lonestar
Carrier: pivotwork
Locknut: stock
Hubs F|R: stock painted burgundy
Bars: tag x5
Throttle/Clutch Lever: stock polished
Grips: Renthal full diamond
Nerfs: DG race peg
Bumper: Tag chrome
Grab Bar: DG fat series
Front Shocks: YFZ 450
Rear Shock: stock
Brake Lines: stock
Rotors F|R: stock
Rims F|R: Douglas 190s and ITP baja
Tires F|R: 21 inch ITP Holeshot XCR front, 20 inch ITP Holeshot GNCC rear



Body:

Plastic: Maier silver shinny
Graphics|Seat Cover: Stock
Number Backgrounds: None
Handguards: Powermadd painted suburu blue
Bar Pad: Tag
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock milled
Bore & Stroke: 4mm
Displacement: 400-409
Cam: None
Carburetor: 29 mikuni
Air Filter|Box: k&n/stock
Pipe|Silencer: fmf fatty-fmf powercore
Clutch|Plates: Hinson basket, Barnett dirt digger clutch
Gearing F|R: 13-41
CDI|Killswitch: Dyna / Pro design
Cooling: GM dexicool, Pro design line cooler and water pump propller
Other: PPG Miltone Burgundy painted frame, aarms, swinger, Polished misc pieces everywhere, Pro desigin timing advance, alba shift drum, forged shift forks, top notch billet parts, boyseen reeds, trinity 10mm reed spacers, B+B motor list goes on and on..

[Mxjunkie]

It does get used every once in awhile :blah:

http://i55.photobucket.com/albums/g146/Mxjunkie69/DSCN4498.jpg

[Mxjunkie]

Aint no trailer queen either :blah:

http://i55.photobucket.com/albums/g146/Mxjunkie69/2a_149a.jpg

[coolguy8769]

MY 2005 YFZ450




Chassis | Suspension | Controls:

Frame: Powdercaoted white by pappy
A Arms: Walsh LT
Swingarm: Powdercoat white
Steering Stem: +1 chrome walsh/ +1 white houser
Stbilizer: none
Axle: RPM Dominator II
Carrier: stock
Locknut: Blue ModQuad
Hubs F|R: stock
Bars: Tag T2
Throttle/Clutch Lever: custom PC
Grips: Oury
Nerfs: AC
Bumper: Duncan Chrome
Grab Bar: AC
Front Shocks: Elka Elite's!!
Rear Shock: stock for now
Brake Lines: Streamline
Rotors F|R: stock
Rims F|R: DWL
Tires F|R: ITP MXR6's



Body:

Plastic: Yamaha Blue
Graphics|Seat Cover: Yamaha
Number Backgrounds: mailbox
Handguards: Acribe's
Bar Pad: Tag
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: stock
Cam: "cam mod"
Carburetor: stock
Air Filter|Box: no lid
Pipe|Silencer: Curtis Spark's Big Core
Clutch|Plates: stock
Gearing F|R:
CDI|Killswitch: stock
Cooling: Engine Ice
Other:

http://i4.photobucket.com/albums/y141/coolguy8769/DSC00560.jpg

http://i4.photobucket.com/albums/y141/coolguy8769/DSC00561.jpg

http://i4.photobucket.com/albums/y141/coolguy8769/DSC00559.jpg

http://i4.photobucket.com/albums/y141/coolguy8769/DSC00525.jpg

[exsweetie66]

Chassis | Suspension | Controls:

Frame: Stock, PC Spiced Berry Over Chrome
A Arms: Laeger's +2+1 PC Black and Chrome
Swingarm: Laegers +1 1/4 PC Black
Steering Stem: Stock
Stbilizer: None
Axle: Lonestar +4
Carrier: Lonestar Twin Row
Locknut: Rad
Hubs F|R: Stock PC Spiced Berry Over Chrome
Bars: Tag T2
Throttle/Clutch Lever: Stock PC Black and Spiced Berry/ Moose
Grips: Tag
Nerfs: DG PC Black With Pink Nets
Bumper:
Grab Bar: Stock
Front Shocks: Custom Axis Triple Rate Fully Adjustable
Rear Shock: Stock with TCS Conversion
Brake Lines: Streamline
Rotors F|R: Stock
Rims F|R: ITP/Douglas Beadlocks
Tires F|R: Maxxis Razrs/Turf Tamers



Body:

Plastic: Maier Race Cut White, QuadTech Hood
Graphics|Seat Cover: none yet, planning on Nac's
Number Backgrounds: none yet, also planning on Nac's
Handguards: none
Bar Pad: Tag
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Port and Polish
Bore & Stroke: Stock
Displacement: 400cc
Cam: Stock
Carburetor: Stock
Air Filter|Box: Uni/Stock
Pipe|Silencer: HMF
Clutch|Plates: Stock
Gearing F|R: Stock
CDI|Killswitch: ProDesign White
Cooling: Stock
Other: Thanks to all my Sponsors and Support, UpDog Industries, J-H Racing, Nmotion, and Laeger's, and of course my boyfriend who made my dream bike possible.

Here are Before and After Pics, obviously the yellow was before.

http://i22.photobucket.com/albums/b304/ilovemymxer/Herbie%20and%20Holli/400ex.jpg

http://i22.photobucket.com/albums/b304/ilovemymxer/Herbie%20and%20Holli/ambercreekshot3.jpg

http://i22.photobucket.com/albums/b304/ilovemymxer/Herbie%20and%20Holli/ambercreekshot2.jpg

http://i22.photobucket.com/albums/b304/ilovemymxer/Herbie%20and%20Holli/ambercreekshot.jpg

http://i22.photobucket.com/albums/b304/ilovemymxer/Herbie%20and%20Holli/amberbridgeshot.jpg

http://i22.photobucket.com/albums/b304/ilovemymxer/Herbie%20and%20Holli/amberandmoose400.jpg

http://i22.photobucket.com/albums/b304/ilovemymxer/Herbie%20and%20Holli/amberandbike.jpg

[welpracing]

Chassis | Suspension | Controls:

Frame: 05 YFZ 450 Gusseted and Powdercoated
A Arms: Lonestar DC4 Long Travel +2.5, Chrome uppers and powdercoated lowers
Swingarm: Lonestar Std Length Round House Design, chrome
Steering Stem: Lonestar Std Length
Stbilizer: JPMX
Axle: Lonestar +4
Carrier: Lonestar
Locknut: OEM
Hubs F|R: Oem and Powdercoated/ OEM and Powdercoated
Bars: Renthal
Throttle/Clutch Lever: Honda 400ex With Chrome Cover/ Works Connection
Grips: Qury
Nerfs: Rath Racing Propegs
Bumper: Blingstar Flight Series
Grab Bar: Rath Racing
Front Shocks: Elka Elites Quad Rate Long Travel
Rear Shock: Elka Elite Dual Rate Long Travel
Brake Lines: Streamline Stainless Braided
Rotors F|R: Oem/Oem
Rims F|R: Douglas 4-1 yellow Label/ Douglas Shamrock Beadlocks
Tires F|R: ITP Holeshot Mxr6/ Itp Holeshot Mxr6



Body:

Plastic: Laker Customs with Gen X Hood
Graphics|Seat Cover: JPMX/JPMX
Number Backgrounds: JPMX
Handguards: PowerMadd
Bar Pad: Fly Racing
Fuel Tank: OEM



Engine|Drive System:

Cylinder|Head: OEM
Bore & Stroke: OEM
Displacement: 439cc
Cam: Oem with Cam Mod
Carburetor: OEM Jetted
Air Filter|Box: K&N/Ron Woods
Pipe|Silencer:FMF/ FMF TI4
Clutch|Plates:OEM/OEM
Gearing F|R: OEM
CDI|Killswitch: OEM/ Pro Design
Cooling:OEM liquid
Other:Chorme Powercoated Engine covers
http://i75.photobucket.com/albums/i288/welpracing/07race11.jpg
http://i75.photobucket.com/albums/i288/welpracing/07raceRear.jpg
http://i75.photobucket.com/albums/i288/welpracing/07racemotor.jpg
http://i75.photobucket.com/albums/i288/welpracing/07raceFront2.jpg
http://i75.photobucket.com/albums/i288/welpracing/07racefilter.jpg
http://i75.photobucket.com/albums/i288/welpracing/07raceAngle.jpg



Thank you very much for letting me enter the contest and good luck to everyone

Brandon

[Sprks450r04]

Chassis | Suspension | Controls:

Frame: Walsh Gusseted
A Arms: Walsh long travel 250R
Swingarm: RPM
Steering Stem: Walsh w/ Houser clamps
Stabilizer: PEP
Axle: RPM
Carrier: RPM
Locknut: OEM
Hubs F|R: Honda 400ex OEM
Bars: Tag T2
Throttle/Clutch Lever: Honda/PEP
Grips: Renthal
Nerfs: AC Racing
Bumper: AC Racing
Grab Bar: AC Racing
Front Shocks: Elka Quad rate
Rear Shock: Elka Dual rate
Brake Lines: Galfer Steel Braided
Rotors F|R: Honda 400ex OEM
Rims F|R: Douglas .190/ Douglas Ultimate Beadlocks
Tires F|R: Razr MX



Body:

Plastic: Maier
Graphics|Seat Cover: Nac’s Racing
Number Backgrounds: Attak Graphics
Handguards: none
Bar Pad: Tag
Fuel Tank: OEM



Engine|Drive System:

Cylinder|Head: PCM
Bore & Stroke:OEM
Displacement:400cc
Cam:Hot Cams intake/exhaust
Carburetor: 40mm FCR
Air Filter|Box: Pro Design/ OEM
Pipe|Silencer: Pro Circuit T4
Clutch|Plates: OEM
Gearing F|R: 14/40
CDI|Killswitch: OEM/Pro Design
Cooling:OEM (no rezzie)
Other:

[Sprks450r04]

2

[Sprks450r04]

3

[hardbodyt]

Chassis | Suspension | Controls:

Frame: Custom Trans Blue Powder Coating, and Gussets - BK Performance
Sub-Frame: Chrome Sub-frame, Motor mounts, and Heat shield - S&H plating
A Arms: +3 Roll Design Lobo II Front end, Custom Trans Blue Powder Coating
Swingarm: Custom Trans Blue Powder Coating
Steering Stem: Chrome Anti-Vibe Lonestar +1+1 steering stem
Stabilizer: Denton Steeing stabilizer
Axle: Chrome Axcalibur Lonestar +4 axle
Carrier: Lonestar Twin Row Billet Bearing Carrier
Locknut: Lonestar AntiFade
Hubs F|R: Custom Trans Blue Powder Coating
Bars: Renthal Bars, Custom bar Pad
Throttle/Clutch Lever: ASV CLUTCH LEVER or Magura Hydro Clutch (ALTERNATE)
Grips: TAGS
Nerfs: Fat LASER ETCHED Tusk 3/8 thick Nerf Bars
Bumper: Chrome Duncan Race front Bumper
Grab Bar: DirtSkins Grab Bar Cover
Front Shocks: Custom Axis Racing Triple Rate Shocks
Rear Shock: Custom Axis Dual Rate Shock
Brake Lines: Russell +3 Stainless steel Braided Brake Lines
Rotors F|R: Stockers
Rims F|R:4+1 Fronts Hiper Wheel, 4+5 Rears Hiper Wheels
Tires F|R: 450r 22X7X10 front tires, Ohtsu 20X10X9 rear tires



Body:

Plastic: 2006 Black OEM Plastics
Graphics|Seat Cover: K&K ATV Blue tribal flame graphics, and seat cover
Number Backgrounds: N/A
Handguards: N/A
Bar Pad: Custom
Fuel Tank: Clarke 5.5 gallon tank



Engine|Drive System:

Cylinder|Head: Custom Molycoat Head, and Cylinder
BK Performance
Kibblewhite +1mm oversized Valves, Ported, and polished


Bore & Stroke: 87mm Wiseco Forged Piston, 70mm stock stroke
Displacement: 11:1
Cam: Hot Cam Stage 2, and Heavy duty Cam Chain
Carburetor: Sparks Racing Kehihn 39mm FCR Carb
Air Filter|Box: K&N filter kit
Pipe|Silencer: Polished White Brothers E-Series Pro Meg Full Exhaust
Clutch|Plates: NEW FACTORY HONDA
Gearing F|R: 14T Steel SunStar, and 38T White Brothers Racing Aluminum Sprocket
CDI|Killswitch: White brother Rev Limiter, PRO DESIGN KILL SWITCH
Cooling: Molycoated Head and Cylinder to dissipate heat
Other: Custom Trans Blue Vein Side Covers BK Performance
450R headlight assembly
Houser Wristrester
450R Pegs
Hinson Brake pedal
Custom Diamond plated Battery cover
Custom axis Shock Covers
DG side frame guards
PRM swing-arm, and full body skids
Custom shrouds (air scoops) stainless steel
JRD custom Rezzie Clamps
HARDKOR MASTER CYLINDER, and THROTTLE COVER
Lonestar E-Brake Block off
NACS ATV CASE Saver

[hardbodyt]

Pic 2

[hardbodyt]

PIC 3

[hardbodyt]

PIC 4......THANKS FOR ALL YOUR HARD WORK ON THIS POWDER, AND MOLY WORK PAPPY!

[hardbodyt]

PIC 5 MORE MOTOR

[hardbodyt]

PIC 6...

[hardbodyt]

PIC 7

[hardbodyt]

PIC 8

[hardbodyt]

PIC 9

[Warnerade]

Chassis | Suspension | Controls:

Frame:Stock
A Arms: Laeger
Swingarm:Stock
Steering Stem:Stock
Stbilizer: Denton
Axle:LSR
Carrier:Stock
Locknut:Stock
Hubs F|R:Sotkc
Bars:Tag
Throttle/Clutch Lever: Stock
Grips:Scott
Nerfs:AC
Bumper:AC
Grab Bar:Rath
Front Shocks:Elka
Rear Shock:Elka
Brake Lines:Stock
Rotors F|R:Stock
Rims F|R:Douglas
Tires F|R:Holeshot MXr6



Body:

Plastic:Stock
Graphics|Seat MX Revolution
Number Backgrounds: Go For it
Handguards: Stock
Bar Pad: Tag
Fuel Tank:Stock



Engine|Drive System:

Cylinder|Head:Stock
Bore & Stroke:Stock
Displacement:450
Cam: Stock
Carburetor: whats that?
Air Filter|Box:Pro Design pro flow
Pipe|Silencer: Yoshimura full
Clutch|Plates:Stock
Gearing F|R:14/35
CDI|Killswitch: Pingel
Cooling:Stock
Other:Cherry Bomb

http://a445.ac-images.myspacecdn.com/images01/17/l_b2f770d2f7d53a231f2a2c2dc67743d4.jpg

http://a106.ac-images.myspacecdn.com/images01/2/l_f9a2a205f28e9aae048ce3922474a839.jpg

[elementryder]

Dang why do all you guys with your trick arse 450s gotta come in here and steel my glory..its about time a 300 won :devil:

Ill have to update these pictures when i get the rest of my crap in. but for now here.

Chassis | Suspension | Controls:

Frame: Custom Gusset Powdercoated Kawi Green with silver and gold flake
A Arms: Walsh G33
Swingarm: Powdercoated Green
Steering Stem: Stock PC flat black
Stbilizer: Precision ( not on bike)
Axle: RPM
Carrier: stock
Locknut: Stock
Hubs F|R: stock
Bars: Pro Taper Dirtbike Bars Reed Bend.
Throttle/Clutch Lever:Stock
Grips: Pro Taper
Nerfs: Xfactor
Bumper: IMS on there. Blingstar DC on the way
Grab Bar: Rath
Front Shocks: Fox Evols
Rear Shock: Axis
Brake Lines: Galfer
Rotors F|R: stock
Rims F|R: Hipers/burgard
Tires F|R: mxr6



Body:

Plastic: Black Laker customs.
Graphics|Seat Cover: Trick Racing Inc.
Number Backgrounds: GoForIt pre printed. ( not in pictures )
Handguards: none
Bar Pad: Pro Taper
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Um.
Bore & Stroke: Stock Bore WR Crank.
Displacement: .
Cam: stock cam modded
Carburetor: stock
Air Filter|Box: No Lid Cut up back.
Pipe|Silencer: Nmotion With a Gen1 end cap.
Clutch|Plates: Factory.
Gearing F|R: 15/37
CDI|Killswitch: stock/Pro design
Cooling: engine ice.
Other: Stickers..ha. Walsh Battery Box. 1 jrd tie rod. 1 walsh tie rod. lol.

http://i77.photobucket.com/albums/j62/cumongrljusridit/NewPics2032.jpg
http://i77.photobucket.com/albums/j62/cumongrljusridit/NewPics2029.jpg

http://i77.photobucket.com/albums/j62/cumongrljusridit/NewPics2034.jpg
http://i77.photobucket.com/albums/j62/cumongrljusridit/NewPics2046-1.jpg
http://i77.photobucket.com/albums/j62/cumongrljusridit/NewPics2030.jpg
http://a556.ac-images.myspacecdn.com/images01/15/l_a5116caa5e434dc8c6582ec06662dd9b.jpg

[JRP]

hey joe, ur supposed to post a pic of quads that run:blah: haha jk

Originally posted by JRP
hey joe, ur supposed to post a pic of quads that run:blah: haha jk :mad:

it going to be running by the weeking again. IT RAN IN THOSE PICTURES!!!!!!!!!

[QuadJunkies]

The underdog!
Ill throw this in for my Daughter(LILQJ) since shes in school all week.
Mini Monster Hybrid Blaster/CR90

Chassis | Suspension | Controls:

Frame: Blaster
A Arms: +3 Laeger
Swingarm: +2 Laeger
Steering Stem: Stock
Stbilizer: Denton
Axle: 300ex
Carrier: Honda 400ex
Locknut: 400ex
Hubs F|R: 400ex
Bars: Fly
Throttle/Clutch Lever: 400ex-Cr 85
Grips: Spider
Nerfs: AC
Bumper: DG
Grab Bar: Stock
Front Shocks: Elka triple rate w/piggy backs
Rear Shock: Elka dual rate w/remote
Brake Lines: Streamline
Rotors F|R: galfer
Rims F|R: Dougals
Tires F|R: LT 450 Dunlop stock Radials



Body:

Plastic: Black Maier
Graphics|Seat Cover: Spastic-Monster Energy
Number Backgrounds: BRM
Handguards: N/A
Bar Pad: Fly
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Cr85
Bore & Stroke: Bore/90 stroke/stock
Displacement: 90cc
Cam:N/A
Carburetor: Mikuni 28mm
Air Filter|Box: Uni / custom airbox and intake
Pipe|Silencer: Dyno port
Clutch|Plates: Hinson
Gearing F|R: Sprocket Specialist-hard Anodized 14/48
CDI|Killswitch:CR 85 - Pro Armor
Cooling: YFZ 450 radiator
Other:

Cryo treated lighting Rod
Ceramic bearings
Case stuffing
polished transmission
Trinity heatshieild
Custom Kicker
Side Winder 428 Chain
ARS-FX chain guide
Powdercoating:

Fire Red
Phyco Lime
Textured Black


http://www.pbase.com/quadjunkies/image/75798633.jpg
http://www.pbase.com/quadjunkies/image/75798616.jpg
http://www.pbase.com/quadjunkies/image/75798620.jpg
http://www.pbase.com/quadjunkies/image/75798625.jpg
http://www.pbase.com/quadjunkies/image/75798627.jpg
http://www.pbase.com/quadjunkies/image/75798629.jpg
http://www.pbase.com/quadjunkies/image/75873184.jpg
http://www.pbase.com/quadjunkies/image/75891834.jpg
http://upload.pbase.com/image/75986736/large.jpg

[RaptorRacer45]

Chassis | Suspension | Controls:

Frame: Stock
A Arms: Stock
Swingarm: Stock
Steering Stem: Stock
Stbilizer: none
Axle: Stock
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock
Bars: Tag T2
Throttle/Clutch Lever: YFZ/Stock
Grips: Spider
Nerfs: none
Bumper: Pro Armor XC
Grab Bar: Stock
Front Shocks: YFZ Stock
Rear Shock: Stock
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: ITP GP/OMF
Tires F|R: Maxxis Razr2/Maxxis Razr



Body:

Plastic: Stock
Graphics|Seat Cover: Stock
Number Backgrounds: Custom
Handguards: Cycra Probend
Bar Pad: Factory Effex
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 686cc
Cam: Stock
Carburetor: EFI
Air Filter|Box: No Toil/Stock
Pipe|Silencer: HMF Sport
Clutch|Plates: Stock
Gearing F|R: 14/38
CDI|Killswitch: Dynojet/ Pro design
Cooling: Stock
Other: Pro Armor/GYTR Skid Plate Protection
Pro Armor Footpeg Maximizers

http://i17.photobucket.com/albums/b89/Naugle45/ECORPics014.jpg

http://i17.photobucket.com/albums/b89/Naugle45/ECORPics013.jpg

http://i17.photobucket.com/albums/b89/Naugle45/Team45022.jpg

http://i17.photobucket.com/albums/b89/Naugle45/Team45009.jpg

http://i17.photobucket.com/albums/b89/Naugle45/Team45014.jpg

[dopeyferree]

This is my 2005 YFZ XC

Chassis | Suspension | Controls:

Frame: BK Performance Coatings
A Arms: ATV Fourplay MGC +1
Swingarm: Stock
Steering Stem: Roll Design +1
Stbilizer: Precision
Axle: Lonestar Axcaliber
Carrier: Stock
Locknut: LSR
Hubs F|R: Stock
Bars: Fasst Co. Flexx
Throttle/Clutch Lever: Stock
Grips: Spider
Nerfs: AC Racing
Bumper: IMS Intimidator
Grab Bar: Custom
Front Shocks: Elka Sports and Racing
Rear Shock: Gt Thunder
Brake Lines: Streamline Stainless
Rotors F|R: Stock/ Streamline
Rims F|R: HIPER
Tires F|R: Kenda Radials 22-7-10 20-11-9



Body:

Plastic: Maier Red
Graphics|Seat Cover: Alba Gripper Cover
Number Backgrounds: GYTR
Handguards: Cycra Composite
Bar Pad: Flexx
Fuel Tank: IMS



Engine|Drive System:

Cylinder|Head:
Bore & Stroke: 98mm
Displacement: 480
Cam: Crower
Carburetor:
Air Filter|Box: Ready Racing
Pipe|Silencer: DR.D
Clutch|Plates: Rekluse
Gearing F|R: 14-38
CDI|Killswitch: Pro Armor
Cooling:
Other:


http://i18.photobucket.com/albums/b113/dopeyferree/DSC00552.jpg

http://i18.photobucket.com/albums/b113/dopeyferree/DSC00554.jpg

http://i18.photobucket.com/albums/b113/dopeyferree/DSC00559.jpg
http://i18.photobucket.com/albums/b113/dopeyferree/DSC00555.jpg

http://i18.photobucket.com/albums/b113/dopeyferree/DSC00553.jpg
http://i18.photobucket.com/albums/b113/dopeyferree/DSC00551.jpg




http://a296.ac-images.myspacecdn.com/images01/60/l_0877ef4d1009d1b90c9687ff4e5e6907.jpg

[D Bergstrom]

2004 TRX450R desert racer.


Chassis | Suspension | Controls:

Frame: Stock w/Bare gusset kit
A Arms: Houser +2.5
Swingarm: Houser +1 1/4
Steering Stem: Houser +2
Stbilizer: Precision
Axle: LSR
Carrier: stock
Locknut: SRP
Hubs F|R: Stock/LSR
Bars: Pro Taper SE
Throttle/Clutch Lever: Motion pro twist/MSR
Grips: Pro-grip
Nerfs: IMS
Bumper: PRM
Grab Bar: PRM
Front Shocks: Elka
Rear Shock: Elka
Brake Lines: Galfer
Rotors F|R: Stock
Rims F|R: ITP Baja
Tires F|R: Holeshot XCT



Body:

Plastic: Maier
Graphics|Seat Cover: Throttle Jockey/Quadtech
Number Backgrounds: Custom
Handguards: Powermadd
Bar Pad: Pro-Taper
Fuel Tank: Clarke dry break



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 450
Cam: 04/05 CRF
Carburetor: Stock
Air Filter|Box: Pro Design Foam/Stock
Pipe|Silencer: Yoshimura TRC full system
Clutch|Plates: Stock
Gearing F|R: Varies
CDI|Killswitch: Stock
Cooling: Stock
Other: Wiseco 11.5:1 piston, head ported and polished

[D Bergstrom]

One more.

Doug

[TWISTED DINLI]

2004 DINLI 90

Chassis | Suspension | Controls:

fame: stock
A Arms: Hetrick/DC motorsports +5”
Swingarm: Maximum RPM +2”
Steering Stem: stock
Stbilizer: none
Axle: Durablue +4
Carrier: DC motorsports
Locknut: stock
Hubs F|R: stock
Bars: renthal
Throttle/Clutch Lever: stock
Grips: Oury black
Nerfs: XFR pro peg w/ heel guards
Bumper: maximum rpm
Grab Bar: stock
Front Shocks: Elka 12”
Rear Shock: Elka 16”
Brake Lines: stock
Rotors F|R: stock
Rims F|R: douglas
Tires F|R: douglas


Body:

Plastic: race cut front black/stock rear black
Graphics|Seat Cover: Maximum RPM
Number Backgrounds: none
Handguards: PowerMadd
Bar Pad: renthal
Fuel Tank: stock


Engine|Drive System:

Cylinder|Head: Maximum Rpm porting
Bore & Stroke:
Displacement: 90cc
Cam: none
Carburetor: KOSO 28mm
Air Filter|Box: UNI
Pipe|Silencer: Koso/Maximum RPM
Clutch|Plates:
Gearing F|R:
CDI|Killswitch: Maximum RPM /Pro Design
Cooling: air cooled
Other: Very fast
Big thanks to: Justin Hall at MAXIMUM RPM and Mom and Dad

pic 1

[TWISTED DINLI]

pic 2

[TWISTED DINLI]

pic 3

[TWISTED DINLI]

pic 4

[MentalState]

2007 Polaris Outlaw..
KTM525
Flex bars
Rox anti vibe
homemade hand gaurds
Precision Stabilizer
PRM skids
Fox Podium shocks.
AC nerfs
Hiper wheels
Maxxis Razr 2's
Billet hubs
Custom seat cover
Maier Kill switch
Some other goodies..

[MentalState]

qwe

[MentalState]

sdf

[MentalState]

asssss

[MentalState]

tyu

[MentalState]

lkj

[05Z400rdr]

Originally posted by elementryder
Dang why do all you guys with your trick arse 450s gotta come in here and steel my glory..its about time a 300 won :devil:

dude i'd like to see that win too! that's the sweetest 300ex i've ever seen! do u live in pa..cuz i see u have a lot of burgard on it. jw cuz i live like 15mins from burgards

[HonDa450RgiRL]

2006 TRX 450r

Frame: stock
A Arms: JB Racing Long Travel
Swingarm: stock
Steering Stem: stock
Stbilizer: stock
Axle: Dominator
Carrier: stock
Locknut: stock
Hubs F|R: Stock purple
Bars: Moose Racing
Throttle/Clutch Lever: ASV/ASV
Grips: Sefas Mountain bike grips
Nerfs: AC
Bumper: TAG
Air Filter: White Brothers
Exhaust: White Brothers Aluminum Pro
Grab Bar: stock
Front Shocks: PEP long travels
Rear Shock: PEP
Brake Lines: Stock
Rotors F|R: stock
Rims F|R: Hipers
Tires F|R: Kenda Klawz
Graphics: Spastic
Frame: candy Purple
Plastic: honda Stock



http://i47.photobucket.com/albums/f174/xxwhothatgirlxx/great.jpg


http://i47.photobucket.com/albums/f174/xxwhothatgirlxx/5.jpg

http://i47.photobucket.com/albums/f174/xxwhothatgirlxx/good.jpg

http://i47.photobucket.com/albums/f174/xxwhothatgirlxx/ReArEnDD.jpg

[elementryder]

Originally posted by 05Z400rdr
dude i'd like to see that win too! that's the sweetest 300ex i've ever seen! do u live in pa..cuz i see u have a lot of burgard on it. jw cuz i live like 15mins from burgards

yep i live in southern lancaster about and hour from burgards we became pretty good friends and he hooks me up...mabey well see each other some time

[spiderrider04]

2005 450r

Chassis | Suspension | Controls:

Frame: stock
A Arms: jb long travel
Swingarm: stock
Steering Stem: stock
Stbilizer: pep
Axle: rpm dominator
Carrier: stock
Locknut: rad
Hubs F|R: stock painted yellow
Bars: fasst flexx co
Throttle/Clutch Lever: stock
Grips: spider
Nerfs: um
Bumper: tag
Grab Bar: stock
Front Shocks: long travel pep
Rear Shock: stock
Brake Lines: stock
Rotors F|R: stock
Rims F|R: hipers
Tires F|R: kenda klaws

Body:

Plastic: yellow mair and black mair hood
Graphics|Seat Cover: spastic designs
Number Backgrounds: attack
Handguards:
Bar Pad: fox racing
Fuel Tank: stock

Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: 450
Cam: hotcams stage 2
Carburetor: stock
Air Filter|Box: uni
Pipe|Silencer: rossier
Clutch|Plates: stock
Gearing F|R: stock
CDI|Killswitch: prodesign
Cooling: engine ice
Other: 13.5:1 dasa/je piston

http://i58.photobucket.com/albums/g275/killa_texan/101_2785.jpg
http://i58.photobucket.com/albums/g275/killa_texan/101_2786.jpg
http://i58.photobucket.com/albums/g275/killa_texan/101_2787.jpg
http://i58.photobucket.com/albums/g275/killa_texan/101_2789.jpg http://i58.photobucket.com/albums/g275/killa_texan/101_2790.jpg