valves

[proff x]

ok guys i have an 2005 honda 450r with hmf slip,k&n airbox lid, and a hot cams stage . my motor ticks alot and i was wondering if its worth getting the kibble white valves and springsor if i could get awat with just the springs. or if its normal.i adjusted the valves when i first put the cam in and i did it several months ago. any incite would be much appreciated.

[speedfreaksguy]

Try tightening up your exhaust valve lash to .009. That quieted my valvetrain, and it's a little easier on your valves.

[250X_project]

Yeah, if you tighten up the valve lash than it will quiet ... but then you risk loosing compression. The ticking is common with Hot Cams, because of the excess clearance.

I would invest in some HD springs to prevent valve float. ;)

[JOEX]

Originally posted by speedfreaksguy
Try tightening up your exhaust valve lash to .009. That quieted my valvetrain, and it's a little easier on your valves.
What is the recomended lash for the Hotcam and how is .009 easier on the valves?