PDA

View Full Version : IMS Tank


Scottt89
03-16-2007, 12:26 AM
I have the IMS 4gal tank, having trouble with the turning stopping just a little before it should. It is a Burgard, I believe +1 as it came with the quad so I'm not 100%. I am using Pro-Tapers.

Has anyone figured out a way to get the stem to stop hitting the tank when turning?
hang1p
03-16-2007, 03:04 AM
i shimmed my stem about .375 outward behind the stem clamp
Kirt13
03-16-2007, 11:40 AM
Originally posted by Scottt89
I have the IMS 4gal tank, having trouble with the turning stopping just a little before it should. It is a Burgard, I believe +1 as it came with the quad so I'm not 100%. I am using Pro-Tapers.

Has anyone figured out a way to get the stem to stop hitting the tank when turning?
Can you please post a pick of the tank.....we could probably help you out better that way.
louis
03-16-2007, 10:29 PM
I have a 1 + forward an 1 + higher and it clears the tank. I had to use stock handle bar clamps to so it would not hit. The teather cord I had to remount.
Rich250RRacer
03-16-2007, 11:49 PM
Originally posted by louis
I have a 1 + forward an 1 + higher and it clears the tank. I had to use stock handle bar clamps to so it would not hit. The teather cord I had to remount.

That's the newer style IMS tank and there's always problems with mounting and clearance. You'd be better off trying to find the older style IMS tank or go with a Clarke.
Scottt89
03-17-2007, 12:14 AM
I'm going to try to dig up a pic. But it is actually the old style IMS. It is rounded in the front instead of indented. I had a newer style that cracked, so I bought this one from Tony Kellner(Barry Hawks old Mechanic). It came off of Tonys old bike. The petcock deff. mounts further back then the new style I first had.

I'm wondering if I may need to look into the +1 forward.
Scottt89
03-17-2007, 12:32 AM
I have attached a link to some pics, I have a few others, nothing with a close view right now. Hopefully it can give some idea of my situation.

250r Red Tank (http://i149.photobucket.com/albums/s54/fatjew89/250rRedtank.jpg)

250r Redtank 2 (http://i149.photobucket.com/albums/s54/fatjew89/250rRedTank3.jpg)
trx250r180
03-17-2007, 12:45 AM
you need a +1 forward stem or an aftermarket 400ex one,i have a leager xc stem on my leager 250r clears both style ims tanks with no shimming,i have both styles of tanks and work fine even with a pro taper pad on

http://www.exriders.com/vbb/showthread.php?s=&threadid=281731&highlight=leager

here pics of my 4.0 tank
Scottt89
03-17-2007, 01:01 AM
I think thats what it may come down to. My buddy works at a machine shop, so luckily I have access to different methods to fix my issue. I'm going to try shaving the clamp down a bit more. If that fails, it looks like I'll be buying a new stem. Thanks for the input!
hang1p
03-17-2007, 03:05 AM
scott spend $2 on a piece of flat stock and some longer bolts and shim behind the stem clamp I know I did it
robyone
03-17-2007, 07:32 AM
Yep, the newer 4 gallon only works properly with a stock height or a +2 stem. I would suggest doing it right and selling your stem and picking up one of the above mentioned.
Rich250RRacer
03-17-2007, 04:19 PM
Originally posted by Scottt89
I have attached a link to some pics, I have a few others, nothing with a close view right now. Hopefully it can give some idea of my situation.

250r Red Tank (http://i149.photobucket.com/albums/s54/fatjew89/250rRedtank.jpg)

250r Redtank 2 (http://i149.photobucket.com/albums/s54/fatjew89/250rRedTank3.jpg)

Your tank is the old style, the one posted by Louis is the new style. My stem hits my tank slightly, I just left it at that.