PDA

View Full Version : 300ex/250x motor parts



Kickstarts-suck
03-15-2007, 02:15 AM
Anyone need anything? Im parting out my 250x motor and need to sell it all.

the Z Man
03-15-2007, 02:15 PM
I am needing a cam, rockers, oil pump possibly more. paypal ready..

Kickstarts-suck
03-15-2007, 02:17 PM
Originally posted by the Z Man
I am needing a cam, rockers, oil pump possibly more. paypal ready..

ok you want the rockers in the cover?

or just the rockers?

http://img250.imageshack.us/img250/1087/dsc00304gk5.jpg (http://imageshack.us)

the Z Man
03-15-2007, 02:28 PM
Just the rockers, the valve cover seems fine.. I do need the adjusters though.
For some reason, I was not getting oil to the top of the motor, would that be oil pump?

the Z Man
03-15-2007, 02:29 PM
Cam bearings too if ya got em.

Kickstarts-suck
03-15-2007, 02:38 PM
I would rather not take the rockers out of the cover.

Yes either you need a new oil pump or you don't have the banjo bolt lined up right where the oil lines gos from the top end to the bottom.

I have the cam bearings on the cam.

the Z Man
03-15-2007, 08:09 PM
ok, well I will take what you have, if ya want to leave the rockers in the valve cover that is fine. just need a total shipped to central Iowa 50156, shipping on something that small should be reasonable.
Be sure and leave paypal information so we can get er done!! Z. #41

Kickstarts-suck
03-15-2007, 08:33 PM
Originally posted by the Z Man
ok, well I will take what you have, if ya want to leave the rockers in the valve cover that is fine. just need a total shipped to central Iowa 50156, shipping on something that small should be reasonable.
Be sure and leave paypal information so we can get er done!! Z. #41

ok i cant get the oil pump off because that 1 bolt behind the clutch. I cant get the clutch off because when i try to loosen the nut in the clutch basket the whole thing spins. I tried everything i could think of. How did you get yours off?

do you still want the other stuff if i cant get the oil pump off?

the Z Man
03-16-2007, 08:40 AM
I use a strap wrench and an impact, you could try putting it in gear, wedge a screw driver in the fins of the clutch (carefully) and using ratchet smack it with a rubber mallet. Be sure the little tab in the center nut is pryed out.
If you cant get it I still want the other parts...

Kickstarts-suck
03-16-2007, 09:48 AM
Originally posted by the Z Man
I use a strap wrench and an impact, you could try putting it in gear, wedge a screw driver in the fins of the clutch (carefully) and using ratchet smack it with a rubber mallet. Be sure the little tab in the center nut is pryed out.
If you cant get it I still want the other parts...

yea i did the screw driver in fins........ broke clutch basket... :p

ill try again today.

Ill have some pics of other stuff later today also.

Kickstarts-suck
03-16-2007, 10:31 PM
Well I still wasn't able to the the clutch loose to get to that bolt.

Here are pics of the rockers and cam
If you still want the stuff just make an offer. If not a guy on ebay wants the rockers.

http://img411.imageshack.us/img411/8093/dsc00385fa1.jpg (http://imageshack.us)
http://img472.imageshack.us/img472/9378/dsc00384nu9.jpg (http://imageshack.us)
http://img403.imageshack.us/img403/5323/dsc00386oj6.jpg (http://imageshack.us)

the Z Man
03-17-2007, 10:19 AM
How does 30 shipped sound?

Kickstarts-suck
03-17-2007, 10:59 AM
There is a 250x cam on ebay 4 bids at $21. and rocker arms with cover for $26

so how about 40 shipped?

Tlongs400
03-17-2007, 11:18 AM
i am interested in the whole head possibly..how much

Kickstarts-suck
03-17-2007, 11:22 AM
Originally posted by Tlongs400
i am interested in the whole head possibly..how much

its on ebay now.

www.ebay.com
Item number: 190092577943

kwik02gixxer
03-17-2007, 01:36 PM
how much for cover and rockers,cam shipped to 43102? also give me a price including the head too both ways thanks kellie

the Z Man
03-17-2007, 03:39 PM
40 shipped sounds good, get me paypal info, Z. #41

Kickstarts-suck
03-17-2007, 07:35 PM
Originally posted by kwik02gixxer
how much for cover and rockers,cam shipped to 43102? also give me a price including the head too both ways thanks kellie

sold the rockers and cam sorry.

Head is on ebay.
I posted link earlier.
Item number: 190092577943


the Z Man: ill pm you my paypal.

Kickstarts-suck
03-26-2007, 01:14 PM
up

the Z Man : you going to send the money????

Kickstarts-suck
04-04-2007, 08:48 AM
upp

zell250x
04-05-2007, 01:49 PM
do you have the 2 bolts that bolt the head to the cylinder, cam chain tensior on the back side of the cylinder, and oil line?

Kickstarts-suck
04-05-2007, 03:10 PM
Originally posted by zell250x
do you have the 2 bolts that bolt the head to the cylinder, cam chain tension on the back side of the cylinder, and oil line?

you mean the 2 big allen bolts? if so yes, I have a tensioner and the oil line also.

zell250x
04-05-2007, 05:04 PM
yes they should be around 4 inches long or close to that. how much for everything shipped to 50859, southwest iowa? thanks

Kickstarts-suck
04-05-2007, 06:05 PM
Originally posted by zell250x
yes they should be around 4 inches long or close to that. how much for everything shipped to 50859, southwest iowa? thanks

here is a pic of your stuff
http://img177.imageshack.us/img177/4672/dsc00451bj6.jpg (http://imageshack.us)

15 shipped?

Caseys 300ex
04-05-2007, 07:09 PM
Do you still have your piston and rings? how much

Kickstarts-suck
04-05-2007, 07:24 PM
Originally posted by Caseys 300ex
Do you still have your piston and rings? how much

nope sold them with cylinder on ebay