Stock Front Wheel Backspacing

[ISurvivedNMU]

I need to order some new Baja rims, and I want to match the front backspacing.... is it 4+1 or 3+2

My guess is 4+1.........

I just measuered it, but i cant remember..... It sucks getting old.

Thanks for the help...

3+2

[ISurvivedNMU]

Really..... I cannot picture the lip being that wide......

My guess would have been wrong....

[400exrider707]

edit

[D Bergstrom]

When I measured my stock wheels I came up with 4:1.5. When I went to 4:1 aftermarket wheels and no other changes, the front of the quad was 1 inch narrower, so that would make the stock wheels at 4:1.5 pretty close. If you go with 4:1, you will be 1 inch narrower, if you go with 3:2, you will be 1 inch wider.

Doug

[400exrider707]

Originally posted by D Bergstrom
When I measured my stock wheels I came up with 4:1.5. When I went to 4:1 aftermarket wheels and no other changes, the front of the quad was 1 inch narrower, so that would make the stock wheels at 4:1.5 pretty close. If you go with 4:1, you will be 1 inch narrower, if you go with 3:2, you will be 1 inch wider.

Doug


Yeah you're right sorry Ill fix my post

[ISurvivedNMU]

Well.........

I already ordered the 3+2 bajas.........

[eastside 400]

stock offset is 3:2, if u use 4:1 it will make the front end 2" narrower overall,1" on each side.

[Sjorge450R]

the 3:2 bajas will make your front end wider. My front is about 44" and the rear is at like 47.