Ritthjp
03-10-2007, 07:52 PM
My wife has a 1997 300ex. I've cleaned the carb, made sure nothing was clogged.
It has a Cobra exhaust on it & K&N Filter.
jetting right now is:
Main Jet: 132
Pilot: 38
Needle: 4th notch down
Air/Fuel screw: 2 1/4 turns out
It idles great, and at a slow rev up the RPMS is fine. On decel it backfires a tad. When I punch the throttle it completely bogs out and dies. If I pump the throttle I can keep it from dying.
The float isn't stuck.
Any suggestions?
It has a Cobra exhaust on it & K&N Filter.
jetting right now is:
Main Jet: 132
Pilot: 38
Needle: 4th notch down
Air/Fuel screw: 2 1/4 turns out
It idles great, and at a slow rev up the RPMS is fine. On decel it backfires a tad. When I punch the throttle it completely bogs out and dies. If I pump the throttle I can keep it from dying.
The float isn't stuck.
Any suggestions?