View Full Version : valve seals/rings?
81 clark racing
03-03-2007, 02:02 PM
is there a way to tell before you open the motor if its the seals or the rings that are gone? thanxs
speedfreaksguy
03-03-2007, 06:12 PM
You need to do a leak down test.
400eXr1d3rZ
03-03-2007, 06:45 PM
If the valve seals are gone you'll be burning oil on startup and on deacelleration. If rings are bad then do a compression test, or if you burn oil on heavy acceleration.
81 clark racing
03-03-2007, 09:29 PM
o all right thanxs guys
joshyz125
03-06-2007, 02:56 AM
on the 400, and i could be wrong, and if i am i know somebody will correct me,
But i don't think you can a compression test with a stock cam, you have to do a leak down test.
With the automatic Decompression on the stock cam, i don't think you can get it to crank over fast enough to get an accurate reading.
Powered by vBulletin® Version 4.2.1 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.