different pistons in banshee......

[harry64chevy]

I just bought a 99 banshee for $1500. alls It needed was a throttle cable. I replaced cable rode it for approx 10 mins. and it died. So i tore it down and somebody said to find what it was bored out to you have to read the pistons. So i cleaned them off and noticed that they were different. The left piston had 1.00 mm
and the rh side had 0.50 mm.

anyone ever here of this? the part numers on each pistons are

LH - A78F2 1.00 MM 513 P4

RH - F72LO 0.50 MM 513 P2



CAN ANYONE EXPLAIN THIS???

[harry64chevy]

anyone in or around PA know where to get a good deal on pistons for a banshee?

Also anyone know of a good shop in the philly area to get cylinders micd and bored out?

[brian250racer]

I've seen it before. It's just the previous owner trying to get away without doing a complete(proper) top end rebuild.

[TWILES]

I bought Wiesco for mine. I think they were around 150 for the kit. You get everything BUT wristpin bearings. They are the same as a Blaster. If you are worried about spending money, you shouldn't have bought a Banshee.

[250r4life]

yah- you dont want to rebuild just one side... they need to be equal...

[250r4life]

Originally posted by TWILES
If you are worried about spending money, you shouldn't have bought a Banshee.

yep...

[firefighterjosh]

This is the kit I got Vitos piston I got! (http://www.vitosperformance.com/atv_parts/home.php?cat=212)

3 years with them and no problems!


Vitos has about 8 kits to choose from. Good company

website for them (http://www.vitosperformance.com/atv_parts/home.php?cat=173)