PDA

View Full Version : Key/Neutral/Reverse position



Xylene
03-02-2007, 09:17 AM
I have Pro Taper SE bars (Raptor bend) on my 250EX and the plastic mount for the key and lights fits under the cross bar ... just barely. I guess I'm going to mount them in my plastics somewhere, just haven't decided on where.

Could anyone who's done this please post a picture of the location you chose to help me decide? Thanks

300exOH
03-02-2007, 09:28 AM
Originally posted by Xylene
I have Pro Taper SE bars (Raptor bend) on my 250EX and the plastic mount for the key and lights fits under the cross bar ... just barely. I guess I'm going to mount them in my plastics somewhere, just haven't decided on where.

Could anyone who's done this please post a picture of the location you chose to help me decide? Thanks

I don't have any pics but I mounted the reverse and neutral lights on the flat area behind the headlight(toward the bars) and I mounted the keyswitch on the right side of the tank basically directly below the bars. If I remembver right you have to mount the rev/neutral lights on either side of the flat arear or it will interfere with the back of the headlight housing.

taino_racing
04-19-2007, 05:44 PM
on my wifes 06 250ex i used a modquad top plate for a 400ex 05-06 style work perfect w no mods.i was told all 250,300ex ,400ex and 450r are all the same,jr

dman250
04-23-2007, 03:05 PM
ill put a picture on later, there just to the right on the flat part, but thats on an ,03

dman250
04-24-2007, 02:53 PM
muddy but u can see it

dman250
04-24-2007, 02:56 PM
hope this helps

some_dude
04-24-2007, 06:45 PM
how do u get the key and lights out of the plactice thing??

300exOH
04-25-2007, 07:44 AM
Originally posted by some_dude
how do u get the key and lights out of the plactice thing??

For the key switch- unplug the wires and remove the metal clip and it should slide out from the top

For the neut/rev lights- unplug the wires and pop the colored lens off the top and push the rubber part through the plastic

some_dude
04-25-2007, 02:34 PM
ahh that easy huh..lol