PDA

View Full Version : question



xrjamie
02-27-2007, 08:50 AM
can i use an dg and an white bros e series togetor in pipe and muffler or w/e yeahs call them now-a-days i have the white brothers e-series muffler and i wanna get a DG pipe or w/e that goes from the motor to the muffler will it work i'm not that smart with 4-wheelers lol

atvrider77
02-27-2007, 07:44 PM
it shuld bcuz i used a procircuit exhaust and a fmf fatty pipe on my blaster, so it shuld work for u...if not u culd just weld it and it wuld wurk perfect, but it should just fit right on there with no mods!!!

250X_project
03-01-2007, 03:18 PM
The DG is longer than the stock head pipe. If the muffler fits the stock pipe it won't fit the DG, unless you cut it. That would work fine, if the inlet was the right size on the muffler.

BlaineKaiser450
03-09-2007, 10:24 PM
it might...