250 r parts wanted....BIG list

[dunatic]

Ok, so Im putting this R together with a buddy and weve found a whole list of stuff that is missing or needs replaced before assembly.

The more you have the more that I want it from you. Some stuff I need pics...please read below

86-76 rear grab bar (need pics)...must be straight...GOT IT

upper radiator mounts....GOT EM

(4) frame rubbers that sit under gas tank...GOT EM

86-87 foot peg bolts (must be OEM)....still need them

86-87 rear engine mount (need pics)...must be straight (GOT IT)

swing arm pivot tubes (tubes inside the swing arm that ride on the bolt and bearings) (GOT IT)

Now I need the brackets that go over the front of the frame rails, that connect to the upper tab on the radiator shrouds.

[dunatic]

just bumpin it so that I can get these parts as fast as possible....if you got em, let me know right away.

[Slinky]

Originally posted by dunatic
just bumpin it so that I can get these parts as fast as possible....if you got em, let me know right away.
dude should have told me you needed the bolts...i would have sent them with the pegs...i'll go see what i can find in the garage for ya.

[dunatic]

my bad...im switching this bike back to a 86-87 frame and totally spaced that thought.

I bought this bike in a box...it's missing a few pieces as you can see.

[Slinky]

i'll see if i can dig up the bolts, you need 4 of them right?

[250Renvy]

I would just buy most that stuff new. They aren't that much money - you'll probably spend more on shipping than the cost.

You'd get it a lot faster too. Just a suggestion.

[dunatic]

I just figured that if someone had things like the grab bar, swinger pivot tube and rear engine mount, they might have the rest.

[dunatic]

ok, so I found a few parts, but still need the rest. I edited the list above.

[dunatic]

anybody got the rest of the parts i need ?

[downtown_sounds]

I should have most everything you need. Give me a email at agbracing@gmail.com I know I have 2 grab bars, 2 sets of radiator mounts. rubber parts. I have many many more r parts if you need anything else. I have paypal and will ship asap. Brian

[dunatic]

Brian

Just sent you an email with the remaining list of parts that i need...let me know what you got

Steve




Originally posted by downtown_sounds
I should have most everything you need. Give me a email at agbracing@gmail.com I know I have 2 grab bars, 2 sets of radiator mounts. rubber parts. I have many many more r parts if you need anything else. I have paypal and will ship asap. Brian

[sandslinger113]

I have an 86 grab bar , top radiator mounts, and rear motor mounts for 86-87. all in very good shape. let me know!

[dunatic]

thanks for the offer, but I think that Ive got everything that I thought I needed.

However, what I do need are those brackets that go over the front of the frame that hold the upper tab of the radiator shrouds onto the frame.