PDA

View Full Version : Ported 250R Top End FS!


MET
02-24-2007, 08:34 AM
I have a 87 250R cylinder thas has a OS,HD sleeve,its ported,has 69mm bore,269cc,ProDesign Cool Head,spare dome, also includes new 72.2mm piston kit for 295cc BB,and stock uncut stock head! Kit will fit all years of 250R's,but 87-89 must use 4.5mm base spacer plate! Head is cut for race fuel! Asking $375.00 US,shipped,OBO!

Works very well with Sparks TT pipe, ESR TRX5 pipe, VForce reeds,and Keihin AS 38mm PWK carb!
http://i106.photobucket.com/albums/m273/MET_69/100_0103.jpg
300ex07
02-24-2007, 10:46 PM
do you have the sleeve for the 295 bore and would it work with an 86 short rod? thanks
MET
02-25-2007, 04:58 AM
This cylinder has a HD oversized sleeve installed in it, the bore is 69mm now, and there is room in the sleeve to safely go to 73.5mm! It is a direct bolt on and go for 86's, 87-89 will require a base spacer plate! I have had offers elsewhere and I quoted them a best price of $325.00 US shipped! Thanks

http://i106.photobucket.com/albums/m273/MET_69/100_0104.jpg
300ex07
02-25-2007, 06:28 AM
Does that head use a gasket or an o-ring?
MET
02-25-2007, 06:41 AM
Originally posted by 300ex07
Does that head use a gasket or an o-ring?

It uses a gasket!
300ex07
02-25-2007, 01:01 PM
what is the cylinder ported for?
MET
02-25-2007, 04:20 PM
Originally posted by 300ex07
what is the cylinder ported for?

MX/Fast Trail
300ex07
02-25-2007, 04:29 PM
If you'll take $300, i'll take it. If yes PM me your paypal account.
MET
02-25-2007, 05:09 PM
Originally posted by 300ex07
If you'll take $300, i'll take it. If yes PM me your paypal account.

I had a $300.00 offer 8-9 hours ago, sorry, the best I can do is $325.00 US shipped!

Let me know, I will be back Monday night!

PayPaL= jmcb@sympatico.ca

Thanks Jeff
300ex07
02-26-2007, 03:37 PM
You have a PM
MET
02-26-2007, 06:32 PM
Originally posted by 300ex07
You have a PM

I just PM'd ya back!
MET
02-27-2007, 05:43 AM
Originally posted by 300ex07
You have a PM

No pressure,but could you give me a heads up either way because I have another buyer at another site! I told him a deal is pending!

Thanks Jeff
300ex07
02-27-2007, 08:47 PM
Is the head gasket a special gasket for the head or will a stock gastet work?
MET
02-28-2007, 04:11 AM
Originally posted by 300ex07
Is the head gasket a special gasket for the head or will a stock gastet work?

I used a OEM CR250 gasket,but I enlarged it.

I can include a new head gasket!
300ex07
02-28-2007, 04:11 PM
You have a PM. Thanks
MET
03-01-2007, 03:58 AM
Originally posted by 300ex07
You have a PM. Thanks

I Pm'd ya back last night!
MET
03-04-2007, 02:43 PM
This kit is sold!