torque specs please

[ridered666]

got a kfx putting a 440 kit w/ new over sized cylinder and piston

could somebody please give me the torque specs for the topend;cylinder, heads,cam caps, everything with the top end.
i'd really appreciate it
thanks:devil:

[drzoo2]

Cam caps are 7ft/lbs

Oh hell click this link........

manual (http://manuals.dqt.be/index.php?option=com_remository&Itemid=36&func=select&id=9)

z

[ridered666]

i couldn't find anything on the kfx 400 i dont know if im just stupid or it just aint on there

[drzoo2]

Same bike as a Suzuki LTZ400. There are a few differences but not in the information you need.

z

[ridered666]

oh i got it dude thanks a lot that was a brain fart i knew that but aparently wasnt thinking

[ridered666]

one more thing, with this kit everything else is stock its my friend's fourwheeler, i know it needs a cam and stuff to go with the higher compression and all that i say im farely familiar with high performance stuff but never the less what jet and needle do you think would be ideal
thanks

[drzoo2]

I personally am not over thrilled with the Dyno Jet stuff. For the price you end up with jets you are never going to use. All this really for the adjustable needle. Alba has an adjustable needle and comes with two jets. A main and a pilot. $20 or so. With a big bore you may need to get a different main. 2 bucks at the dealer. I don't think you can get a big enough main with a Dyno Jet. Largest is a 165 if I'm not mistaken.

z