250 R Clutch lever in the motor??

[RidetheRed]

Im almost done rebuilding my 250R, but I have a problem. I pulled clutch lever out of the motor and when I put it back in there it just slips and I cant tell that it is engaging the clutch. Is there something im doing wrong or will I have to take the motor back apart to fix this. I really dont want to take the motor apart again.

[CorvetteZ06]

you probbaly forgot to properly fit your clutch rod lifter back into the cluctch lever. look here :

clutch lever # 6 on this page

http://www.planethondaracing.com/cgi-bin/hondaparts/results_parts_details?mv_session_id=RcXwt5ZM&mv_pc=170&se=pg_d_id%3d376%20and%20pg_my_id%3d108



CLucth rod lifter # 14 on this page

http://www.planethondaracing.com/cgi-bin/hondaparts/results_parts_details?mv_session_id=RcXwt5ZM&mv_pc=169&se=pg_d_id%3d375%20and%20pg_my_id%3d108

[RidetheRed]

Ok, Is it possible then to fix this with out decronstructing what ive already accomplished if I have the motor put together?

[CorvetteZ06]

your going to have to take the preasure plate off, the springs,, etcc. move that clutch lever manually and see if the rod moves back and forth.

[RidetheRed]

Ok, Thank you, I guess thats not as bad as I was afraid it would have been.

[clutch22]

how can I tell if I have the clutch update kit or not? right now mine has like a tappet with a small steel ball in it. is that the old version?

[CorvetteZ06]

thats the old style.