PDA

View Full Version : 450r carb price?


jbm0121
02-18-2007, 08:41 PM
about how much is a used 450r carb?

just wondering what kind of range the prce is so i can price match
hondaracer57
02-18-2007, 08:45 PM
like 100-120 buck depends on if it comes with cables or not...
jbm0121
02-18-2007, 09:09 PM
my buddy has one i can get for a little under 50 without cables... abotu how much are cables
ImplodedMindZ
02-18-2007, 09:11 PM
10-15$ for the throttle cable is all u need.
From service honda an 04 clutch cable its 10$, heres the link & part# (http://www.servicehonda.com/parts.php?partnumber=22870-hp1-000&getpart=1&getprice=Submit)
jbm0121
02-18-2007, 09:43 PM
thanks for the info...

i read i nthe sticky you need to get 450r fuel line. what size is that? all i can find is hose for sale by size and length what will i need to buy for it?
hondaracer57
02-18-2007, 09:48 PM
when u get the cables just buy a fuel line too from service honda...its a fuel line for a 04-05 450r carb...
ImplodedMindZ
02-19-2007, 06:40 AM
Iv seen people use regular fuel line. the member Mobile Dyno on here used This clear reinforced lookin line. I would have rather used a straight one than that crocked @ss 450r one. Mine always seemed kinked kinda and i even cut a lil off of it to try to get it better. But its up to you.

<a href="http://photobucket.com" target="_blank"><img src="http://www.exriders.com/vbb/attachment.php?s=&postid=1602636" border="0" alt="Photobucket - Video and Image Hosting"></a>
02-19-2007, 08:38 AM
Is the 450R carb worth the coin?
jbm0121
02-19-2007, 10:42 AM
i read all the stickies on them and everyone says they are worth it....i am now jsut tryin to figure out how hard/whats involved with it to see if i want to try it
ImplodedMindZ
02-19-2007, 10:54 AM
Its really easy to do. I had my old carb off and the new one on including shaving down the boots w/ a dremel in a lil over an hour. Throttle cable hooked up and everything.
jbm0121
02-19-2007, 11:09 AM
ok so what do i do with the hotstart? im not even sure what hotstart is(ill search it)

but do i just leave it or plug it or what?
ImplodedMindZ
02-19-2007, 11:49 AM
Its been explained to me b4 and somewhere on here is a pretty good explanation but u dont need it. I just plugged mine. i suck a lil flat metal tack down in the hole so silicone wouldnt run all the way down in there and put some hightemp gasket maker silicone in there. Theres a picture in this thread (http://www.exriders.com/vbb/showthread.php?s=&threadid=272141)