PDA

View Full Version : Kick start extension


joeb23
02-18-2007, 08:08 PM
Does anyone have anytips to get my kick start extension off? Im not sure what brand it is or anything and it looks like it might be pressed on.
rr outlaw
02-19-2007, 07:55 AM
Do you hav any pics of this extension? If it is pressed on you could use a grinder to get it off and then smooth out the edges. Pics would help...
02-19-2007, 09:23 AM
They dont press on. They just slid on and then a bolt holds it on. Maybe its seized together.
deathman53
02-19-2007, 12:09 PM
its tough to get off, hit it top to bottom lighty, you will get it loosen and pull it hard. Maybe some heat on it also. When you go to put it back on, put a coating of anti-sieze on it. I beleive the kicker used for them is a mid 90's yz250. I know my crf450r one is 96 yz250 kicker.
joeb23
02-19-2007, 04:33 PM
Also I have another question. What kind of intake boot should I use? I have a 400ex frame crf motor and 450r carb.
joeb23
02-19-2007, 04:39 PM
heres a pic of the kick extenstion....now that I look at it closer it looks like someone has rewelded right in the middle as you can see.
joeb23
02-21-2007, 12:48 PM
Anyone???
02-21-2007, 12:55 PM
should only be heald on by 1 bolt at the end. If its welded you will have to cut it off.
Chin_Chilla
02-21-2007, 12:57 PM
Originally posted by deathman53
its tough to get off, hit it top to bottom lighty, you will get it loosen and pull it hard. Maybe some heat on it also. When you go to put it back on, put a coating of anti-sieze on it. I beleive the kicker used for them is a mid 90's yz250. I know my crf450r one is 96 yz250 kicker. Your sig. is rediculous, took up half the thread... shorten that thing up....:ermm:
Toadz400
02-23-2007, 09:23 AM
Originally posted by Chin_Chilla
Your sig. is rediculous, took up half the thread... shorten that thing up....:ermm:

Go into your options and just turn of sigs, there's no use in trying to get people to shorten their sigs. I also got sick of having an entire page be filled with someone's sig.

As for that extension, looks like you'll need to use some WD-40 and heat to get that thing off. Just be careful not to set anything on fire with the WD.
Houser450
02-23-2007, 01:36 PM
try using a slide hammer its a tool everyone should have in the garage saved me a bunch of times
Lee
400eXr1d3rZ
02-23-2007, 10:32 PM
Originally posted by Chin_Chilla
Your sig. is rediculous, took up half the thread... shorten that thing up....:ermm:

Make your words smaller.