Black R/T
02-18-2007, 07:17 PM
first off, i know im new to this forum and that might scare alot of people off, but ive been selling on ebay for years (106 with 100% positive feedback) and im also a verified paypal member (21). my ebay and paypal email is Dabyrd1999@yahoo.com.
now, im parting out my woods bike because i broke my leg a few months ago and its winter time so im not riding it much right now. im also in the market for a 450 so this one is going to go. whatever doesnt sell on here is getting listed on ebay, but i figured i'd give you guys a crack at this stuff and try to save myself some listing fees. pictures on request, buyer is responsible for shipping and I accept only paypal or cash on local pickup.
Durablu X-33 racing axle- good chrome and perfectly straight with hubs
$275
Houser +1 1/4 swingarm- red powder coat, could use new bearings
$330
Houser +2 anti-vibe steering stem- black powder coat, excellent condition, new bearing with handlebar mount
$160
Dyna-tek programmable ignition- used for less than a year and works flawlessly
$150
Curtis Sparks Stainless X-6 exhaust (FULLY POLISHED CAN)- just repacked, chrome flaking slightly on the tip
$300
1999 frame painted yellow (badly) no title, but i do have a bill of sale from the guy i bought it from. the subframe is slightly tweaked but it comes with the frame. i retro-fitted some red 05' plastics to it (flawlessly i might add) which come with it. headlight and complete plastic set with seat.
$500
works tripple rate front shocks- with remote rezzies. work fine but could use a rebuild. setup for +2 a-arms.
$200
AC racing pro-peg nerfs (no kickups) -with aftermarket heel gaurds and black nets. good condition but they are well worn.
$150
ive also got: aftermarket and stock front bumpers, 2001 frame and subframe with clean title, stock old style red plastics with a new gripper seat, stock steering stem, 2 sets of stock a-arms, 2 repairable stock swingarms, 2 stock exhaust cans, 2 stock bearing carriers, 2 stock heads (one bare, one complete), 2 valve covers, stock cylinder and piston, 2 sets of cases, 1 good transmission, 1 transmission with a bad 2nd gear, stock camshaft, set of braided SS brake lines (front and back), and a bunch of other stock parts, just ask if you need something.
ive even got some brand new parts that i was planning on installing but didnt get around to. they include: Web 9icam, Hot Rod crank and rod, Fully polished COMPLETE bolt set, Kibblewhite valve springs with titanium retainers, shortened bronze valve guides, 36 tooth aluminum rear sprocket and probably some more stuff i cant think of right now. (ALL BRAND NEW, NEVER USED)
the motor is a 13:1 440 with a woods ported head, kibblewhite valves and valve springs, a fresh seat job and a stage 1 cam. the valve cover is highly polished and the vavles have just been readjusted. this was the first rebuild the motor ever saw and it was done just about 6 months ago. the last 3 months have been spent with very little riding because of my leg. im not listing it until i have done a compression test, i want to see what it has left before i sell it to someone.
feel free to email me about anything at either email address. bluebullypits@yahoo.com or
dabyrd1999@yahoo.com
thanks for checking out my stuff, JP
now, im parting out my woods bike because i broke my leg a few months ago and its winter time so im not riding it much right now. im also in the market for a 450 so this one is going to go. whatever doesnt sell on here is getting listed on ebay, but i figured i'd give you guys a crack at this stuff and try to save myself some listing fees. pictures on request, buyer is responsible for shipping and I accept only paypal or cash on local pickup.
Durablu X-33 racing axle- good chrome and perfectly straight with hubs
$275
Houser +1 1/4 swingarm- red powder coat, could use new bearings
$330
Houser +2 anti-vibe steering stem- black powder coat, excellent condition, new bearing with handlebar mount
$160
Dyna-tek programmable ignition- used for less than a year and works flawlessly
$150
Curtis Sparks Stainless X-6 exhaust (FULLY POLISHED CAN)- just repacked, chrome flaking slightly on the tip
$300
1999 frame painted yellow (badly) no title, but i do have a bill of sale from the guy i bought it from. the subframe is slightly tweaked but it comes with the frame. i retro-fitted some red 05' plastics to it (flawlessly i might add) which come with it. headlight and complete plastic set with seat.
$500
works tripple rate front shocks- with remote rezzies. work fine but could use a rebuild. setup for +2 a-arms.
$200
AC racing pro-peg nerfs (no kickups) -with aftermarket heel gaurds and black nets. good condition but they are well worn.
$150
ive also got: aftermarket and stock front bumpers, 2001 frame and subframe with clean title, stock old style red plastics with a new gripper seat, stock steering stem, 2 sets of stock a-arms, 2 repairable stock swingarms, 2 stock exhaust cans, 2 stock bearing carriers, 2 stock heads (one bare, one complete), 2 valve covers, stock cylinder and piston, 2 sets of cases, 1 good transmission, 1 transmission with a bad 2nd gear, stock camshaft, set of braided SS brake lines (front and back), and a bunch of other stock parts, just ask if you need something.
ive even got some brand new parts that i was planning on installing but didnt get around to. they include: Web 9icam, Hot Rod crank and rod, Fully polished COMPLETE bolt set, Kibblewhite valve springs with titanium retainers, shortened bronze valve guides, 36 tooth aluminum rear sprocket and probably some more stuff i cant think of right now. (ALL BRAND NEW, NEVER USED)
the motor is a 13:1 440 with a woods ported head, kibblewhite valves and valve springs, a fresh seat job and a stage 1 cam. the valve cover is highly polished and the vavles have just been readjusted. this was the first rebuild the motor ever saw and it was done just about 6 months ago. the last 3 months have been spent with very little riding because of my leg. im not listing it until i have done a compression test, i want to see what it has left before i sell it to someone.
feel free to email me about anything at either email address. bluebullypits@yahoo.com or
dabyrd1999@yahoo.com
thanks for checking out my stuff, JP