March Quad of the Month entry thread, 450 quads

[TheFontMaster]

Well this month's QOTM is for any 450cc quad. Honda, Yamaha, Suzuki, ATC, If it's a 450 enter it. The poll will go up next Wednesday. Here are the links to the rules, and the mods list.

Rules:
http://www.exriders.com/vbb/showthread.php?s=&threadid=146713


Mods list:
http://www.exriders.com/vbb/showthread.php?s=&threadid=162941

[xsr_racing28c]

Chassis | Suspension | Controls:

Frame: Herrmann Gusseted Frame
A Arms: Herrmann +2 Long Travel
Swingarm: Herrmann +0 Roundhousing
Steering Stem: Herrmann +1 AntiVibe
Stbilizer: N/A
Axle: DuraBlue X-33
Carrier: Herrmann Billet w/ Herrmann Billet stayplate
Locknut: Herrmann Billet Antifade
Hubs F|R: Hardkor Engineering Front and Rear Anodized Gold
Bars: Pro Taper –Windham Bend
Throttle/Clutch Lever: TerryCable/ Works Connection
Grips: Scott
Nerfs: Ac Propegs relocated
Bumper: Pro Armor Mx
Grab Bar: AC Grab bar
Front Shocks: Custom Axis PiggyBack Titanium (Prototypes) Hi/Lo, Comp, Rebound
Rear Shock: Custom Axis Dual Rate /Dual Adjust
Brake Lines: Streamline Stainless
Rotors F|R: Galfer Wave Rotors/Galfer Wave Rotor
Rims F|R: Hiper Beadlock/ Hiper Dual Beadlock
Tires F|R: Maxxis Razr Mx/ Maxxis Razr Mx

Body:

Plastic: Maier Black
Graphics|Seat Cover: Quadtech Humpseat
Bar Pad: Pro Taper
Fuel Tank: LightSpeed Carbon Fiber

Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 439 cc
Cam: cam modification
Carburetor: Sudco FCR 41 mm Mx Carb / Quickshot/ Carbon Fiber Cover
Air Filter|Box: K&N Filter w/Outerwear / CFM Aluminum Box
Pipe|Silencer: Pro Circuit Titanium 4
Clutch|Plates: Hinson Basket, Hub, and Plates
Gearing F|R: stock
CDI|Killswitch: Pro Armor
Cooling: Intense Fabrication Radiator
Extra: Dynatek Programmable Ignition

Extras: Lightspeed CarbonFiber Side Panels, PC Carbon Frame Guards, Pc Carbon Coolant Bottle Cover, PC Carbon Induction System, Hardkor Blockoff plate, Harkor Reservior Cover, Works Connection Engine Plugs, Boyessen Waterpump, Ready Racing SS oil filter, 321 Carbon Fiber Gas Cap …Tooo much more to List!!!!!!

http://img.photobucket.com/albums/v622/xsr_racing28c/Qotm1.jpghttp://img.photobucket.com/albums/v622/xsr_racing28c/qotm2.jpg
http://img.photobucket.com/albums/v622/xsr_racing28c/qotm4.jpg
http://img.photobucket.com/albums/v622/xsr_racing28c/qotm3.jpg

[Fred55]

Chassis | Suspension | Controls:

Frame: Stock gusseted
A Arms: Houser +2
Swingarm: Stock
Steering Stem: Stock
Stbilizer: Golden West Cycle
Axle: Lonestar Racing
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock
Bars: Tag T-2
Throttle/Clutch Lever: 400ex Throttle/Stock
Grips: OURY
Nerfs:AC
Bumper: Stock 06
Grab Bar: Stock
Front Shocks: Elka Triplerate SSD
Rear Shock: Elka Elite Dualrate
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: ITP .190/ITP Baja
Tires F|R: Kenda Klaw MXR



Body:

Plastic: Stock
Graphics|Seat Cover: GYTR/Jettrim
Number Backgrounds: GYTR
Handguards:None
Bar Pad: none
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke:Stock 2006
Displacement: 450cc
Cam:Cam Mod
Carburetor: Stock FCR
Air Filter|Box: K&N/Stock
Pipe|Silencer: GYTR
Clutch|Plates: Yz450
Gearing F|R: 13/38
CDI|Killswitch: Pro Design
Cooling: Stock
Other: 14:1 Compression CP piston


__________________

[Fred55]

With the rear elka on..dirty though

[Fred55]

Last one

[OutlawEX]

Frame:OEM
A Arms:LAEGERS
Swingarm:LAEGERS
Steering Stem:LAEGERS
Stbilizer:ELKA
Axle:LAEGERS
Carrier:OEM
Locknut:OEM
Hubs F|R:OEM
Bars:RENTHAL FAT BAR
Throttle/Clutch Lever:OEM
Grips:OURY
Nerfs:AC BLACK LINE
Bumper:AC BLACK LINE
Grab Bar:AC BLACK LINE
Front Shocks:ELKA ELITE
Rear Shock:ELKA ELITE
Brake Lines:OEM
Rotors F|R:OEM
Rims F|R:HIPER
Tires F|R:ITP MXR6



Body:

Plastic:OEM
Graphics|Seat Cover:MX REVOLUTION/QUADTECH
Number Backgrounds:MX REVOLUTION
Handguards:N/A
Bar Pad:N/A
Fuel Tank:OEM



Engine|Drive System:

Cylinder|Head:SPECIAL
Bore & Stroke:OEM
Displacement:450CC
Cam:HRC
Carburetor:OEM
Air Filter|Box:OEM
Pipe|Silencer:YOSHIMURA
Clutch|Plates:OEM
Gearing F|R:OEM
CDI|Killswitch:OEM/HRC HARNESS
Cooling:OEM
Other:

[OutlawEX]

2

[Sandgod4]

478cc Cannondale by Blackwidowatv, CP, and Falicon
Ported by DAB Racing
K&N Boomer diret bolt to TB
Terminator Map by Timbo
Moto +2.5 Arms= stock
RMP axle= stock
TCS SSD Quadrates
Carbon Fiber shrouds
Flow exhaust
Ultimates on front w/ Mohawks
.125 rears w/ 8 paddle Gliders
P.E.P stabilizer
ATK seat cover
AC Nerfs
Renthals

[STEVENJANNA]

Chassis | Suspension | Controls:

Frame: Stock/Gusseted
A Arms: Walsh G33
Swingarm: Stock
Steering Stem: Walsh +1.75
Stbilizer: W.E.R.
Axle: LSR
Carrier: Stock
Locknut: LSR
Hubs F|R: Stock/Walsh spindles
Bars: TAG T-2
Throttle/Clutch Lever:400ex/Works Pro Perch
Grips: Scott
Nerfs: AC Black Line
Bumper: Pro Armour
Grab Bar: Pro Armour
Front Shocks: Custom Axis
Rear Shock: Custom Axis
Brake Lines: Galfer
Rotors F|R: Galfer Wave
Rims F|R: ITP
Tires F|R: ITP



Body:

Plastic: Maiers race cut
Graphics|Seat Cover: Sponsor/Quadtech
Number Backgrounds: NACS
Handguards: Power Madd
Bar Pad: TAG
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: DASA race port
Bore & Stroke: Stock
Displacement: Stock
Cam:WEB
Carburetor:Stock
Air Filter|Box: GYTR/Stock
Pipe|Silencer: TC Racing "Long" Supertrapp
Clutch|Plates: Stock/Barnett
Gearing F|R:
CDI|Killswitch: GYTR/Pingel
Cooling: Stock/ESR gauge
Other:

[STEVENJANNA]

...

[STEVENJANNA]

..

[czrider263]

Chassis | Suspension | Controls:

Frame: stock
A Arms: Gibson
Swingarm: JB
Rear Link: JB dual link
Steering Stem: Gibson
Stbilizer: Gibson
Axle: RPM
Carrier: RPM
Locknut: RPM
Hubs F|R: Hardkor
Bars: Tag
Throttle/Clutch Lever: stock/works
Grips: Tag
Nerfs: pro pegs
Bumper: duncan
Grab Bar: stock
Front Shocks: Fox Evol
Rear Shock: Fox Podium
Brake Lines: streamline
Rotors F|R: stock
Rims F|R: douglas
Tires F|R: holshots



Body:

Plastic: stock
Graphics|Seat Cover: East Coast Atv
Number Backgrounds: Offroad Graphics
Handguards: Acerbis
Bar Pad: homemade
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: stock ported by DRG
Piston: Baldwin 14:1
Vavles: DASA
Crank: Falcon
Bore & Stroke: stock
Displacement: 450cc
Cam:web 943
Carburetor: stock DRG taper bore
Air Filter|Box: DRG/stock
Pipe|Silencer: DASA
Clutch|Plates: stock
Gearing F|R: 14/38
CDI|Killswitch: dynateck
Cooling: stock
Other: DRG crankcase Mod


http://i21.photobucket.com/albums/b292/czrider263/06drg/IMG_0087.jpg

http://i21.photobucket.com/albums/b292/czrider263/06drg/IMG_0090.jpg

http://i21.photobucket.com/albums/b292/czrider263/06drg/IMG_0085.jpg

[czrider263]

....
http://i21.photobucket.com/albums/b292/czrider263/06drg/IMG_0088.jpg

[may611]

Chassis | Suspension | Controls:

Frame: stock powder coated texture black
A Arms: HOLZ
Swingarm: HOLZ
Steering Stem: HOLZ
Stbilizer: JH RACING
Axle: RPM
Carrier: RPM
Locknut:RPM
Hubs F|R: LONESTAR
Bars: APPLIED
Throttle/Clutch Lever: WORKS CONNECTION
Grips: SCOTT
Nerfs: AC RACING
Bumper: AC RACING
Grab Bar: AC RACING
Front Shocks:FOX
Rear Shock: FOX
Brake Lines: STOCK
Rotors F|R: WAVE
Rims F|R: HYPERS
Tires F|R: HOLESHOT



Body:

Plastic: STOCK BLACK
Graphics|Seat Cover: JH RACING/QUADTECH
Number Backgrounds: CUTTING EDGE
Handguards: CYCRA
Bar Pad: APPLIED
Fuel Tank:STOCK



Engine|Drive System:

Cylinder|Head: PORTED POLISHED
Bore & Stroke: 450
Displacement:
Cam:HOTCAM
Carburetor: CRF
Air Filter|Box: UNI
Pipe|Silencer: WHITEBROTHER
Clutch|Plates:HONDA
Gearing F|R:
CDI|Killswitch:PRO DESIGN
Cooling: PWR
Other:

[may611]

2

[may611]

3

[lj450r]

2006 Honda TRX450ER

Chassis | Suspension | Controls:

Frame: stock
A Arms: Laeger long travel +2
Swingarm: Laeger with baldwin linkage
Steering Stem: Laeger +1 anti-vibe
Stbilizer: n/a
Axle: RPM
Carrier: Houser
Locknut: Janseen
Hubs F|R: stock
Bars: Tag
Throttle/Clutch Lever: Works Connection
Grips: Renthal
Nerfs: Ac racing pro pegs
Bumper: Ac racing
Grab Bar: stock
Front Shocks: ZPS PEP
Rear Shock: ZPS PEP
Brake Lines: Streamline
Rotors F|R: Wave
Rims F|R: Douglas shamrock beadlocks
Tires F|R: Maxxis mx



Body:

Plastic: stock w/Quad tech hood
Graphics|Seat Cover: Quad tech
Number Backgrounds: Updog
Handguards: n/a
Bar Pad: Tag
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: stock
Cam:stock
Carburetor: stock
Air Filter|Box: Sparks racing
Pipe|Silencer: Sparks racing
Clutch|Plates: stock
Gearing F|R: stock/36
CDI|Killswitch: Pro Armor
Cooling: stock
Other




http://i104.photobucket.com/albums/m162/laegers/450r005-1.jpg

http://i104.photobucket.com/albums/m162/laegers/450r004.jpg

http://i104.photobucket.com/albums/m162/laegers/450r006-1.jpg

[xrxmxcx]

i know the thread in the open forum said production, but this thread doesnt specify anything besides bieng a 450.....

full rebuilt houser yz444f

Chassis | Suspension | Controls:

Frame: Houser Racing Hybrid Yz
A Arms: Gibson +3 long travel
Swingarm: Houser Racing No-link long travel
Steering Stem: Herrman Racing +1 Antivibe
Stbilizer: Denton Rebuildable
Axle: RPM Dominator
Carrier: LSR Twinrow
Locknut: LSR Anti-fade
Hubs F|R: Front-Baldwin Motorsports Rear-Durablue Billet
Bars: Fasst Co Flexx Bars
Throttle/Clutch Lever: Billet Des. Throttle, Magura Hydro Clutch
Grips: Tag Metals
Nerfs: AC Racing Propeg
Bumper: AC Racing Mudscreen
Grab Bar: AC Racing
Front Shocks: Front PEP Longtravel ARC/Big bottle w/ Piggyback setup
Rear Shock: No-link Custom Axis Comp/Reb adj.
Brake Lines: Galfer braided lines Front and rear
Rotors F|R: Streamline Wave Rotors
Rims F|R: Hiper 4:1 front, Hiper 9x9 rear
Tires F|R: Front holeshot MXR4, Rear holeshot MXR4



Body:

Plastic: Maier White Racecut 250r
Graphics|Seat Cover: SouthwickRacing.com via/GoForitGraphics.com, Quadtech Seat Cover
Number Backgrounds: K&K Atv
Handguards: Cycra
Bar Pad: Fasst Co
Fuel Tank: Clarke



Engine|Drive System:

Cylinder|Head: Baldwin Motorsports P&P/Valvejob
Displacement: 444cc.s
Cam: Intake & Exhaust Hotcam Stg. 1
Carburetor: CR flat
Air Filter|Box: K&N, Custom
Pipe|Silencer: Yoshimura Full TRS system
Clutch|Plates: Hinson hub, pressure plate, and basket, Hinson plates
Gearing F|R: 14/37
CDI|Killswitch: Prodesign
Cooling: Walsh RC oversize rad./Engine Ice Coolants

pictures


http://i35.photobucket.com/albums/d177/xrxmxcx/d10.jpg

http://i35.photobucket.com/albums/d177/xrxmxcx/d08.jpg

http://i35.photobucket.com/albums/d177/xrxmxcx/d05.jpg

http://i35.photobucket.com/albums/d177/xrxmxcx/d15.jpg

http://i35.photobucket.com/albums/d177/xrxmxcx/d20.jpg

http://i35.photobucket.com/albums/d177/xrxmxcx/d19.jpg

http://i35.photobucket.com/albums/d177/xrxmxcx/d18.jpg

[fast300ex59]

Chassis | Suspension | Controls:

Frame: 04 stock
A Arms: +2 Janssen
Swingarm: stock
Steering Stem: stock
Stbilizer: none
Axle: lonestar
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: Tag
Throttle/Clutch Lever: stock
Grips: Tag
Nerfs:AC Pro Pegs
Bumper: AC (not shown)
Grab Bar: Rath
Front Shocks: Elka
Rear Shock: stock
Brake Lines: BRAIDED BRAKE LINES
Rotors F|R: stock
Rims F|R: ITP,beadlock rears(not shown)
Tires F|R: hossier TT racing,maxxis razers MX



Body:

Plastic: maier silver plastic
Graphics|Seat Cover: pink spastic (not shown)stock
Number Backgrounds: spastic (not shown)
Handguards: none
Bar Pad: stock plastic piece
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: Ported and Polish
Bore & Stroke:
Displacement: 450
Cam: hot cams
Carburetor: stock
Air Filter|Box: K and N fliter
Pipe|Silencer: rossier
Clutch|Plates: stock
Gearing F|R: stock
CDI|Killswitch:Pro Armor,Jenssen Rev box
Cooling: stock
Other:PEP CHAIN STOPER,TUSK GAS CAP,K&K E BRAKE BLOCK OFF
K&K CASE SAVER,ZIP TIE AIR SCREW,WISECO PISTON,

http://i66.photobucket.com/albums/h273/crazytim59EX/7aa3_12.jpg

http://i66.photobucket.com/albums/h273/crazytim59EX/6cf4_12.jpg

http://i66.photobucket.com/albums/h273/crazytim59EX/81c4_12.jpg

http://i66.photobucket.com/albums/h273/crazytim59EX/Picture008-1.jpg

[Ride1Rob]

My 04 MX YFZ

Frame/ Suspension/ Steering

Stock frame (Candy red)
Full Flight +2 A-arms (Black)
Houser Tie rods
All Balls tie rod ends
JB Racing -1 Swingarm
Elka Piggy Back Triple rate Front shocks
TCS Dual rate Rear shock
G-Force +2 Axle & Axle nut
Douglas Champion Series Beadlocks (9 rear/10 front) Black
Holeshot 19 inch MXR4 rears/ Holeshot 20 inch MXR6 fronts
Burgard +1 steering stem
Burgard fat bar clamp
Tag T2 bars
ODI Rogue hand grips
Denton rebuildable Steering Stabilizer

Powertrain

TRU 450cc
WR Crank & Rod
JE 13.5 to 1 high comp piston
Head ported by Full Spectrum Racing
Hot Cams (Exhaust & Intake)
DID 520 Gold series ATV racing chain (Gold)
15T Rocket sprocket (Front)
38T JT Sprocket (Rear)
GYT-R Jets w/ NCVQ Needle
Alba Racing full exhaust
ESR Intake w/ K&N air filter
Gears 15/38

Body and Misc

Polisport silver plastics (V-Style cut rear fenders)
Rath racing Graphics kit
AC Racing front bumper (Black)
AC Racing Nerf bars (Black) w/ Red nets
AC Racing rear skid plate
Quadtech Carbon Fiber Shock Covers
GYT-R seat cover
GYT-R number backgrounds
GYT-R skid plate
MPS kill switch (Black)
K&K Case saver
K&K Decomp plug
Polished Clutch cover

http://img254.imageshack.us/img254/1198/img1629zy3.jpg (http://imageshack.us)
http://img54.imageshack.us/img54/3870/img1748ee8.jpg (http://imageshack.us)
http://img54.imageshack.us/img54/8408/img1756yl9.jpg (http://imageshack.us)
http://img54.imageshack.us/img54/6969/img1619ys9.jpg (http://imageshack.us)
http://img207.imageshack.us/img207/256/img1621nx5.jpg (http://imageshack.us)

[Mean250r]

Chassis | Suspension | Controls:

Frame: Stock 05
A Arms: +3 Walsh
Swingarm: stock
Steering Stem: stock
Stbilizer: Denton
Axle: lonestar
Carrier: Lonestar
Locknut: stock
Hubs F|R: Lonestar
Bars: Renthal Fat bars (tag pad)
Throttle/Clutch Lever: stock
Grips: Tag
Nerfs: Gibson/ X factor
Bumper: Tag
Grab Bar: AC
Front Shocks: PEP big bottle ARC
Rear Shock: stocker
Brake Lines: Galfer steel braided
Rotors F|R: stock
Rims F|R: Hiper 4-1 off set fronts, Hiper stock offset rears
Tires F|R: Holeshot MXR6



Body:

Plastic: Stock Ellis cut
Graphics|Seat Cover: Stock
Number Backgrounds: none
Handguards: Powermadds
Bar Pad: Tag
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: 450
Cam: hot cams
Carburetor: stock
Air Filter|Box: K and N fliter
Pipe|Silencer:Nmotion
Clutch|Plates: stock
Gearing F|R: stock
CDI|Killswitch:Pro design
Cooling: stock
Other: LSR pb block off, Walsh tie rods and im sure there is more
http://w2.bikepics.com/pics/2007/01/21/bikepics-778025-full.jpg
http://w1.bikepics.com/pics/2006/09/10/bikepics-675955-full.jpg
http://w1.bikepics.com/pics/2006/09/10/bikepics-675963-full.jpg
http://w1.bikepics.com/pics/2006/09/10/bikepics-675953-full.jpg

[dj400ex]

Chassis | Suspension | Controls:

Frame: Dirtworks Gusseted and PC'd
A Arms: ARSFX XC
Swingarm: ARSFX XC
Steering Stem: ARSFX
Stabilizer: Precision
Axle: Stock
Carrier: stock
Locknut: stock
Hubs F|R: stock
Bars: Pro Taper Contour Series
Throttle/Clutch Lever: Stock/ Works Connection
Grips: Spider SLT
Nerfs: Custom
Bumper: PRM Summit
Grab Bar: PRM Desert
Front Shocks: Custom Axis
Rear Shock: Custom Axis
Brake Lines: Stock
Rotors F|R: Stock
Rims F|R: Hipers
Tires F|R: Maxxis Razr2



Body:

Plastic: Stock
Graphics|Seat Cover: Shrum Racing|Stock
Number Backgrounds: Nac's
Handguards: Powermadd
Bar Pad: Pro Taper
Fuel Tank: IMS



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: Stock
Displacement: 449cc
Cam: Hot Cam stage I
Carburetor: stock
Air Filter|Box: stock
Pipe|Silencer: LRD Pro4R Ballistec
Clutch|Plates: stock
Gearing F|R: 14|39
CDI|Killswitch: stock|Pro Design
Cooling: stock
Other: JE Piston 13:1

[dj400ex]

2

[dj400ex]

3

[dj400ex]

4

[thump4863]

2006 Honda 450R - TT Racer


Chassis | Suspension | Controls:

Frame: Stock
A Arms: JB Racing +1 3/8
Swingarm: JB Racing minus 1 5/8 with baldwin linkage
Steering Stem: JB Racing +1 3/8
Stabilizer: Precision
Axle: Team Industries
Carrier: Lonestar
Locknut: Team Industries anti-fade
Hubs F|R: Stock Front/Team Industries Rear
Bars: Tag
Throttle/Clutch Lever: Thumb/Works Connection w/hot start
Grips: Oury
Nerfs: AC Racing
Bumper: Pro Armor
Grab Bar: Rath Racing
Front Shocks: PEP 8 click big bottle
Rear Shock: PEP 8 click big bottle
Brake Lines: Galfer Stainless
Rotors F|R: Galfer Wave
Rims F|R: Hiper
Tires F|R: American Racer


Body:

Plastic: Fullbore
Graphics|Seat Cover: Custom/Quadtech Hump Seat
Number Backgrounds: Custom
Handguards: N/A
Bar Pad: Tag
Fuel Tank: Stock


Engine|Drive System:

Cylinder|Head: Ported/Polished
Bore & Stroke: JE 13.5:1
Displacement: 450cc
Cam: Web 943/921
Carburetor: Stock FCR
Air Filter|Box: Dasa - box bottom cut
Pipe|Silencer: DASA
Clutch|Plates: Stock
Gearing F|R: Sidewinder Chain & Sprockets/Varies
CDI|Killswitch: Pro Design
Cooling: Engine Ice/CV4 hoses

http://img.photobucket.com/albums/v160/thump4863/Rebuild/Picture268.jpg


http://img.photobucket.com/albums/v160/thump4863/Rebuild/Picture128.jpg


http://img.photobucket.com/albums/v160/thump4863/Rebuild/Picture129.jpg


http://img.photobucket.com/albums/v160/thump4863/Rebuild/Picture120.jpg


http://img.photobucket.com/albums/v160/thump4863/Rebuild/Picture131.jpg


http://img.photobucket.com/albums/v160/thump4863/Rebuild/Picture132.jpg


http://img.photobucket.com/albums/v160/thump4863/Rebuild/Picture138.jpg


http://img.photobucket.com/albums/v160/thump4863/Rebuild/Picture141.jpg


http://img.photobucket.com/albums/v160/thump4863/Rebuild/Picture150.jpg

[korniev]

Engine:

ProCircuit Titanium TI4 Exhaust
GYTR Jet Kit
Twin Air filter

Front Suspension:

Laeger's Long Travel +3 A-Arms
Motowoz Triple Ajust. Front Shocks (Triple Adj)
Houser +2 Steering Stem (with clamps)
Pep Steering Damper

Rear End and Suspension:

Motowoz Double Adjus. Rear Shock
Elka Rear Linkage
LSR Axcalibar Axle
JT Rear Sprocket (37 teeth)
ITP 19' MXR 4 Tires

Sport Body

AC Stadium Front Bumper
DG fat series rear Grab Bar
Maier Race-Cut Front fender
White Brothers Nerf Bars


Controls:

Motion Pro Vortex Throttle
Renthal Fat Bar with blue center
Scott Grips
Tech Spec Rubber covers
EastCoastATV Graphic Kit and cover



http://i133.photobucket.com/albums/q71/korniev/ATVSA6.jpg
http://i133.photobucket.com/albums/q71/korniev/ATVSA8.jpg
http://i133.photobucket.com/albums/q71/korniev/ATVSA3.jpg
http://i133.photobucket.com/albums/q71/korniev/ATVSA1.jpg
http://i133.photobucket.com/albums/q71/korniev/ATVSA5.jpg
http://i133.photobucket.com/albums/q71/korniev/ATVSA7.jpg

[quadracer707]

Chassis | Suspension | Controls:

Frame: candy blue gusseted
A Arms: Walsh
Swingarm: Herrmann
Steering Stem: Burgard
Stbilizer: Lost Creek Cycles
Axle: RPM
Carrier: Gibson
Locknut: RPM
Hubs F|R: Harkor/250r
Bars: Fasst Flexx
Throttle/Clutch Lever: ASV
Grips: Tag
Nerfs: X-Factor
Bumper: stock
Grab Bar: AC
Front Shocks: Fox Float Evols
Rear Shock: Elka
Brake Lines: Lost Creek Custom Lines
Rotors F|R: Stock
Rims F|R: ITP/Douglas
Tires F|R: Maxxis/MXR6



Body:

Plastic: Laker Custom
Graphics|Seat Cover: Lost Creek
Number Backgrounds: Custom
Handguards: Power Madd
Bar Pad: Flexx
Fuel Tank: Stock



Engine|Drive System:

Cylinder|Head: Stock
Bore & Stroke: 1mm over
Displacement: 450
Cam: Hotcams
Carburetor: Stock
Air Filter|Box: Pro Design
Pipe|Silencer: Curtis Sparks
Clutch|Plates: Stock
Gearing F|R: Stock
CDI|Killswitch: Dynatech/Pro Armor

[quadracer707]

0

[quadracer707]

picture

[quadracer707]

picture

[quadracer707]

picture 2

[quadracer707]

picture 3

[quadracer707]

picture 4

[krt400ex]

Originally posted by lj450r
2006 Honda TRX450ER

Chassis | Suspension | Controls:

Frame: stock
A Arms: Laeger long travel +2
Swingarm: Laeger with baldwin linkage
Steering Stem: Laeger +1 anti-vibe
Stbilizer: n/a
Axle: RPM
Carrier: Houser
Locknut: Janseen
Hubs F|R: stock
Bars: Tag
Throttle/Clutch Lever: Works Connection
Grips: Renthal
Nerfs: Ac racing pro pegs
Bumper: Ac racing
Grab Bar: stock
Front Shocks: ZPS PEP
Rear Shock: ZPS PEP
Brake Lines: Streamline
Rotors F|R: Wave
Rims F|R: Douglas shamrock beadlocks
Tires F|R: Maxxis mx



Body:

Plastic: stock w/Quad tech hood
Graphics|Seat Cover: Quad tech
Number Backgrounds: Updog
Handguards: n/a
Bar Pad: Tag
Fuel Tank: stock



Engine|Drive System:

Cylinder|Head: stock
Bore & Stroke: stock
Displacement: stock
Cam:stock
Carburetor: stock
Air Filter|Box: Sparks racing
Pipe|Silencer: Sparks racing
Clutch|Plates: stock
Gearing F|R: stock/36
CDI|Killswitch: Pro Armor
Cooling: stock
Other




http://i104.photobucket.com/albums/m162/laegers/450r005-1.jpg

http://i104.photobucket.com/albums/m162/laegers/450r004.jpg

http://i104.photobucket.com/albums/m162/laegers/450r006-1.jpg



that quad is gorgeous! wow, cleanest 450 i have ever seen hands down

[bkp]

2006 Honda 450r This is my buddys so I'll try to list everything that I can remember

1. Elka shocks long travel front and rear
2. Janssen long travel a-arms
3. Blingstar nerf bars
4. Hiper wheel
5. Kenda tires
6. Hinson clutch basket and clutch cover
7. Burgard steering stem
8. Galpher steel braided brake lines
9. RPM axle and RAD lock nut
10. HEP rear fender braces
11. Pro Design kill switch
12. It now has FLEXX bars
13. stage 2 HRC cam
14. It now has a LRD pipe
15. CVR radiator hoses
16. Quadtech seat cover
17. IMS ROLL bumper
18. Hardkor hubs fron and rear