foxplaya4life33
02-14-2007, 02:48 PM
hey im thinking about boring out my engine it is stock right now and i was wondering if this kit on ebay would be all the hardware i need?
i know ill have to get the cylinder bored and honed at a machine shop
the kit includs this
11:1 426cc Wiseco piston for Honda 400EX.Includes piston, rings,circlip and wrist pin.This kit also comes with Namura 440 89mm top end gasket kit( so you don't have to trim or modify a 400 t.e.gasket kit) and a stage 2 HOTCAMS cam.More top-end power than stage 1 with slight mid-range gain. Uses stock valve springs and rockers
http://cgi.ebay.com/ebaymotors/Honda-400EX-426-Wiseco-piston-w-stage-2-Hotcams-cam_W0QQcmdZViewItemQQcategoryZ43977QQihZ001QQitem Z110092329572QQrdZ1
i know ill have to get the cylinder bored and honed at a machine shop
the kit includs this
11:1 426cc Wiseco piston for Honda 400EX.Includes piston, rings,circlip and wrist pin.This kit also comes with Namura 440 89mm top end gasket kit( so you don't have to trim or modify a 400 t.e.gasket kit) and a stage 2 HOTCAMS cam.More top-end power than stage 1 with slight mid-range gain. Uses stock valve springs and rockers
http://cgi.ebay.com/ebaymotors/Honda-400EX-426-Wiseco-piston-w-stage-2-Hotcams-cam_W0QQcmdZViewItemQQcategoryZ43977QQihZ001QQitem Z110092329572QQrdZ1