PDA

View Full Version : 36or37 tooth sprocket ??



EagleLakeGangMX
02-12-2007, 03:16 PM
[SIZE=1][B]which should i go with??

redrider330
02-12-2007, 03:58 PM
well it depends on wat u want top end or bottom bigger u go slower thet op speed 4 the back and faster 4 the front smaller u go in the back or bigger u go in the front more top end so wat ever your type of riding u do

Family Guy
02-12-2007, 05:07 PM
One tooth up or down on the back will not even be a noticible change. Go two teeth on back to make a change that you will notice. One tooth on front sprocket will be noticible.

bwamos
02-13-2007, 10:35 AM
What size tires are you running.. and what conditions are you riding in? (dunes, trail, mx, etc..) Also are you at the stock rev limit, or increased rev limit?

EagleLakeGangMX
02-13-2007, 09:12 PM
Originally posted by bwamos
What size tires are you running.. and what conditions are you riding in? (dunes, trail, mx, etc..) Also are you at the stock rev limit, or increased rev limit? im runnin 20s..my mods are is my sig..and i ride mostly trails and roads and the occasional trip to the track..and stock rev.. i dont want a huge change soo should i go 2 smaller back or 1 front??

N300exJ
02-14-2007, 07:39 AM
keeping it close to stock gearing go up one in the front. For a lil bit more top end over stock go up one in the front along with dropping two in the back.

Sjorge450R
02-14-2007, 07:38 PM
the 13/36 is a little slower than a 14/38 setup. If you are interested in a 36, I have a JT Steel one laying around. Its brand new, i put it on and took it off and went with the 14.

EagleLakeGangMX
02-15-2007, 11:48 AM
how much including shipping to 55803??