PDA

View Full Version : Ice Racing Tires


NickDavis
02-10-2007, 05:34 PM
Can someone tell me where to get the turf tamer style ice racing tires, without the dimples
81 clark racing
02-10-2007, 06:36 PM
try the site sponser c-d racing. or www.motosport.com www.rockymountainatv.com
lee31
02-11-2007, 07:56 PM
MagicRacing.com they are called CHing seng ice racing tires
NickDavis
02-11-2007, 08:20 PM
alright cool, thanks
jsmith2232
02-12-2007, 09:11 AM
I finally got my Cheng shins out this weekend and they hooked up really well. I put 1/2" Kold Kutter screws in every other knob.
400exrider707
02-12-2007, 10:08 AM
Originally posted by jsmith2232
I finally got my Cheng shins out this weekend and they hooked up really well. I put 1/2" Kold Kutter screws in every other knob.

Try 2 per knob....;)
Trevor
02-12-2007, 10:58 AM
I put self taping screws in my claws and the worked awsome this weekend. I could even lift the front of the 300 on the lake. My brother inlaw put the same screws in the tires of his klx300r we raced on the lake but the dirtbike has me all the way even top end but not by a whole lot les the 10 bikes LOL
400exrider707
02-12-2007, 11:25 AM
Originally posted by Trevor
I put self taping screws in my claws and the worked awsome this weekend. I could even lift the front of the 300 on the lake. My brother inlaw put the same screws in the tires of his klx300r we raced on the lake but the dirtbike has me all the way even top end but not by a whole lot les the 10 bikes LOL

We used self tappers before too, huge mistake, they will round off eventually and be useless.
Trevor
02-12-2007, 12:15 PM
They usualy don't stay in that long
jsmith2232
02-13-2007, 06:26 AM
I considered putting one in every knob but I don't want to stud my front and suffer steering. I can still pull the front end off in 4th but it slips a bit first.
400exrider707
02-13-2007, 07:11 AM
Originally posted by jsmith2232
I considered putting one in every knob but I don't want to stud my front and suffer steering. I can still pull the front end off in 4th but it slips a bit first.

so the front isn't studded?
jsmith2232
02-13-2007, 09:24 AM
No, that's why I didn't stud every knob that way I can steer pretty well, I also have razr II's on the front so if theres' a bit of snow it helps quite a bit but on glare Ice i'll probably be screwed.
400exrider707
02-13-2007, 10:38 AM
Originally posted by jsmith2232
No, that's why I didn't stud every knob that way I can steer pretty well, I also have razr II's on the front so if theres' a bit of snow it helps quite a bit but on glare Ice i'll probably be screwed.


You will definitely be "screwed" haha sorry, why not just stud up the fronts?

I have holeshot MX 20x6x10s on the front with 6 screws in each lug, but they are big lugs too, and I have turf tamer 18's on back with 4 in each lug.
300exQuadracer
02-14-2007, 05:07 PM
Originally posted by 400exrider707
I have turf tamer 18's on back with 4 in each lug.

same here but it think i used a box of 1000 and split it between both rears so 500 in each rear
and 250 in each front

i like to use a little silicon on the threads, then screw it in and let them set up and it seem to hold studs longer