Exhaust help

[SandNut777]

OK guys
I just purchased a Pro Curcuit Head pipe and i have a Pro Curcuit T4 Slip-On how do you connect the 2 of them together. When I took the stock head pipe off it has a dounut weld on it about 2 inches back and the stock exhaust clamp tightens down on it. The new head pipe doesnt have the dounut on it.

[underpowered]

it is just a slip fit, no gasket needed. slip the slip on over the head pipe and use the supplied clamp.

[Chin_Chilla]

Is your T-4 a slip on? Because if it is, then more than likely it won't fit on the aftermarket header, IF it's larger diameter than the stock one.

But if it just slide onto the header all you need is like a water hose clamp...

Good luck.