PDA

View Full Version : 250X kick in a 300ex bottom end



dabomb_350x
02-09-2007, 10:45 AM
I am in the planning stages of a rebuild on a ragged 300EX that I got for cheap. I was thinking /wondering if a 250X kickstart can be added to the 300EX lower end. I know that the outercase cover will need machining. Which is ok because I was planning on having it machine to except the factory 350X oil cooler set up. Any lead or pictures would be nice.

Lonestar_R
02-09-2007, 01:52 PM
I believe the ceter case is the same on the kicker side and all you will need is to buy the kicker parts and buy a 250X case cover that way you won't have to machine anything and you will have the whole and the seal for the kicker shaft. Buy a Clymer Manual for the 250X/300EX and it should show you everything in it.....hope this will help you some