Steering Dampner

[toomeyshee87]

Where can you mount them? I had mine mounted to the frame pointing towards the bumper but i got my frame gusseted and it wont work there anymore. Any other ideas?

[VIGILANTE MAN]

What about using one of the 3 holes in the frame member between the steering stem & bumper?

[toomeyshee87]

i would have to make a bracket because the stem is angled back and the plate with the holes isnt

[VIGILANTE MAN]

What brand do you have?

My SRP mounted in one of the holes in the frame with a sleeve that raised the front of the stabilizer to get the correct angle. You could probably use a stack of washers to get the same result.

[oldskoolex400]

heres my w.e.r., not sure if you have a stick or the round style like mine

[toomeyshee87]

i have a denton stick type

[oldskoolex400]

oh, just mount it on your frame somewhere then, has to be somewhere it will go

[toomeyshee87]

havent found a spot yet, my brakeline gets in the way

[VIGILANTE MAN]

Here's a picture of the SRP (basically same as a Denton) that came off my YFZ.

All you need is the sleeve shown & mount it to one of the holes in your frame.

[VIGILANTE MAN]

Here's a close up.