rwgtar68
02-06-2007, 10:07 PM
Im going to be installing a hot cams stage 2 and was wondering how this will effect jetting. Will I have to re-jet the carb? If so generally how many sizes up would the jetting change? I have a big gun silencer, K&N with HRC Lid and a Dynojet stage 2 kit installed... It seemed to get harder and harder to start & hesitated a little at WOT so after 2 full seasons of riding I finally decided to check the valve lash and realized that it was definatley off. I figure if Im going to have to pull the cam to replace the shims I may as well install a performance cam! :D