View Full Version : 300ex question
redrider330
02-06-2007, 06:13 PM
is there ne way 2 intall a kick starter on a 300 ex if so please post back thinks
88blaster
02-06-2007, 06:54 PM
It would be easiest to just put a 250x bottom end in it, if then u would lose the 50cc's but I think u could put a 300ex crank in the 250x bottom end and keep your 50cc's
250X_project
02-10-2007, 06:13 PM
Yes you can put a kick start on a 300EX with some machine work, but the 250X engine would be easier.
NO you can't use a 300EX crank in the 250X cases. They are completely different. The bearings and journals are bigger on the the 300 crank.
You could get a 288cc big bore for the 250X engine and have more cc's than a stock 300EX (282). Only you will have a bigger bore with a shorter stoke, good for fast revving.
Scott-300ex
02-11-2007, 03:59 PM
Get a 250X side case cover and run the shaft outside of it and throw the kicker on it.
250X_project
02-11-2007, 05:13 PM
There's a lot more to it, than the case cover. The cover only lacks a hole for the shaft.
redrider330
02-12-2007, 03:09 PM
thinks sorry it took me 2 long 2 get back im thinking about just dropping the 350x motor in it the reason i want a kick is beecause i have already bought a new starter and now i got a bearing out of the gear that turns the flywheel and i think my starter is screwing up
250X_project
02-12-2007, 04:17 PM
E start is more of a pain than it's worth sometimes. I like my kicker.
Scott-300ex
02-13-2007, 06:35 PM
I like my kicker on my 250r too, but they are only good if you know how to start them with a kicker, so you don't have to kick all day.
Kickbacks a B!*th
Scott-300ex
02-13-2007, 07:11 PM
I like my kicker on my 250r too, but they are only good if you know how to start them with a kicker, so you don't have to kick all day.
Kickbacks a B!(th
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.