Mobile Dyno
02-06-2007, 03:56 AM
Here is an 06' Banshee I did on Saturday. It was very cold. Here are the temps:
44.8 °F
9 % humidity
20.5 in-Hg
Here are the Mods..This customer traded a 06' YFZ 450 for this bike to a guy that I had already tuned this bike in for. This customer made some powerful changes. I will show the difference in what it had..
Here is what it has now:
Toomy T5 pipes,
Trinity Cub 400 Kit
Trinity Head 19cc domes
Trinity Stg 2 Port
V-Force STG 3 reeds
Adjustable Timing plate set at 4*
Trinity 35mm Carbs,
K&N's no box
14t-f, 41t-r sprockets.
Stock Swingarm
Jetting at 400ft with these mods are: K145 mains, Needles in the 4th from top, 58 pilots, 2 turns out on the mixture screws
44.8 °F
9 % humidity
20.5 in-Hg
Here are the Mods..This customer traded a 06' YFZ 450 for this bike to a guy that I had already tuned this bike in for. This customer made some powerful changes. I will show the difference in what it had..
Here is what it has now:
Toomy T5 pipes,
Trinity Cub 400 Kit
Trinity Head 19cc domes
Trinity Stg 2 Port
V-Force STG 3 reeds
Adjustable Timing plate set at 4*
Trinity 35mm Carbs,
K&N's no box
14t-f, 41t-r sprockets.
Stock Swingarm
Jetting at 400ft with these mods are: K145 mains, Needles in the 4th from top, 58 pilots, 2 turns out on the mixture screws