She is done! Venom/Baldwin/Houser/Hybrid Yz444f Build

[xrxmxcx]

heres the list..

Chassis | Suspension | Controls:

Frame: Houser Racing Hybrid Yz
A Arms: Gibson +3 long travel
Swingarm: Houser Racing No-link long travel
Steering Stem: Herrman Racing +1 Antivibe
Stbilizer: Denton Rebuildable
Axle: RPM Dominator
Carrier: LSR Twinrow
Locknut: LSR Anti-fade
Hubs F|R: Front-Baldwin Motorsports Rear-Durablue Billet
Bars: Fasst Co Flexx Bars
Throttle/Clutch Lever: Billet Des. Throttle, Magura Hydro Clutch
Grips: Tag Metals
Nerfs: AC Racing Propeg
Bumper: AC Racing Mudscreen
Grab Bar: AC Racing
Front Shocks: Front PEP Longtravel ARC/Big bottle w/ Piggyback setup
Rear Shock: No-link Custom Axis Comp/Reb adj.
Brake Lines: Galfer braided lines Front and rear
Rotors F|R: Streamline Wave Rotors
Rims F|R: Hiper 4:1 front, Hiper 9x9 rear
Tires F|R: Front holeshot MXR4, Rear holeshot MXR4



Body:

Plastic: Maier White Racecut 250r
Graphics|Seat Cover: SouthwickRacing.com via/GoForitGraphics.com, Quadtech Seat Cover
Number Backgrounds: K&K Atv
Handguards: Cycra
Bar Pad: Fasst Co
Fuel Tank: Clarke



Engine|Drive System:

Cylinder|Head: Baldwin Motorsports P&P/Valvejob
Displacement: 444cc.s
Cam: Intake & Exhaust Hotcam Stg. 1
Carburetor: CR flat
Air Filter|Box: K&N, Custom
Pipe|Silencer: Yoshimura Full TRS system
Clutch|Plates: Hinson hub, pressure plate, and basket, Hinson plates
Gearing F|R: 14/37
CDI|Killswitch: Prodesign
Cooling: Walsh RC oversize rad./Engine Ice Coolants

PICS!

http://i35.photobucket.com/albums/d177/xrxmxcx/d10.jpg

http://i35.photobucket.com/albums/d177/xrxmxcx/d08.jpg

http://i35.photobucket.com/albums/d177/xrxmxcx/d05.jpg

http://i35.photobucket.com/albums/d177/xrxmxcx/d15.jpg

[czrider263]

SWEET LOOKING QUAD

[BuiltBlaster88]

Aw hell dude, that just drives me nuts seeing that thing and then seeing mine about 70% together on the saw horses in the shop. Your white powder coat has really grown on me and looks just outstanding...excellent job on the build..10/10:D

[800screws]

from the look of the snow outside i doubt u have gotten on it yet...but if u did, what do u think of the 444 big bore kit. i heard those engines weren't to fond of throwing a bigger piston in them. revved way slower...
have u noticed a difference?

[hontrx265r]

I had a 444 in mine before, It was lower compression, and I liked it, thought it reved fine. I later switched back to a 426 with 13:5:1, and found that set up to be equally as good if not better.

[hontrx265r]

By the way the houser looks excellent, you did a great job. I'm sure as soon as that snow melts it will be *** kicking time. Mine will be done in a week or two. luckily no snow in phoenix!!

[sandthrower]

ur quad is Fing sweat man :eek2:


About ur seat cover were cab i find one .
I have looked at quad tech site and they no longer list parts for the R.:(

[hontrx265r]

DFR makes the exact same seat cover or jettrim. It doesn't have the quadtech logo, but other then that its identical. I just bought one from DFR and its top notch, very happy with it. google, dirt fiend racing

[sandthrower]

thanks hontrx265r

[ss440ex]

Nice!!
The perfect quad!!
:D

[CrackerboyLV]

Beautyful bike!

Is the exhaust for a yz426f or a YFZ? I'll be ordering one for mine but I would like to start with one that is close to fitting correctly.

[400exMO]

wow

[stocktires]

SICK!

[xrxmxcx]

thanks guys!

the pipe is a modded yfz pipe, full yoshi system...

timoly chains and sprockets came in today, need to pick up some more jets for it to get it dialed in, tried starting it and it was running a little lean so i need to bump up from a 182 main and 45 pilot to probably a 50 pilot and 190 main but i will be tinkering with it all weekend till its running good, and a little rich while its being broken in...

:macho

[figair]

Dude that is Hott,Awesome Job.

Eddie

[TWISTED DINLI]

AWESOME:eek2:

[greenman]

how about a pic from the back and one from the left side?

[AtvMxRider]

Very nice:macho

[xrxmxcx]

heres a pic from the back

http://i35.photobucket.com/albums/d177/xrxmxcx/d14.jpg

and one from the left

http://i35.photobucket.com/albums/d177/xrxmxcx/d20.jpg

[sandthrower]

Man i cant stop stairing at it:eek2:

thats just to nice hope mine comes out 1/2 as nice as that

[JoE4554]

its looks great....i love it

I could walk faster than that thing:scary: .No chain:D

[atvdadma]

Photos taken just before the new SIDEWINDER TI- MOLY SETUP ( Front and Rear and Chain ) was put on and Carb. rejetted and Test Run. You have to walk dam Fast:macho

[CrackerboyLV]

Let me know what your jetting turns out to be....

My YZ444 is a 45 pilot / 188 main At 70 Degrees 2160 ft
it is a little on the rich side with an open TC exhaust.

[atvdadma]

70 degrees must be nice:cool: We are 20 to 30 degrees at about sea level have not run it at WOT to get any plug readings but to get her starting and running for brake in we are 50 pilot 1 1/2 turn out, clip at stock, 185 main this is a 39mm Fcr yz426 carb. don't know if this help you much
70 he said 70 degrees:eek2:

[koh0001]

Sweet!!! Nice job.

[cbr]

sweet quad. i love seeing tricked out quads; thank god for people who make alot more money than me. time for me to find a better job! oh, dont forget to put a chain on it before you go riding.lol

[greenman]

im sorry butt i would love too crawl up on your girl and ride her like no tomorrow:devil:

[jread14]

^^^^ LMAO!!!!!

Looks sick. Great job... Makes me want to finish my KTM project even sooner...

[xrxmxcx]

thanks for the great reply's guys, some interesting... but good nevertheless:p

recently we have changed a few small things on the quad, carb mods (stealth racing mixture screw and accelerator pump) and getting it dialed in, but everything is going great and this thing has some serious power!

also if i could ask, show your support in the voting for march qotm! up against the "all mighty" production bikes

[KingpinsEx]

Thats one of the sickest hybrids i have ever seen!! Looks like a pro calibur ride, very nice job....

[KingpinsEx]

Thats one of the sickest hybrids i have ever seen!! Looks like a pro calibur ride, very nice job....:macho