Log in

View Full Version : No Spark LT230S


smithn1683
02-02-2007, 11:32 AM
I am not getting any spark on my lt230s. I have the plug out and lying on the frame (sanded it down to make contact with bare metal) what can I do to find out where the problem is? I also took apart the run switch. Does the circuit need to be opened or closed in order to run? I tried both ways and no spark.Also is the voltage regulator the only place it is grounded? I tried sanding down the contacts on that too, thinking it may have been a bad ground.
JIMFROMTEXCO
02-02-2007, 11:59 AM
check the cdi... i had the problem with mine when i first got it.. you can prolly find one on ebay fairly cheap
smithn1683
02-02-2007, 12:05 PM
The CDI looks pretty new, is there any way of testing it?
JIMFROMTEXCO
02-02-2007, 03:14 PM
IM NOT SURE ON THAT... how about your stator is that good? you could probally use a voltage tester and see if its producing enough current...
smithn1683
02-02-2007, 08:03 PM
I got it running the run switch was bad so I just too it out:devil:
JIMFROMTEXCO
02-03-2007, 03:52 PM
GLAD TO HERE!