PDA

View Full Version : FOX Floats or Elkas???



azextreme
01-29-2007, 03:32 PM
So what is the best way to go?? mx racing!

WMW-F4R
01-29-2007, 05:12 PM
Floats are light but we have been running Elkas with awesome results...Long travel 14" rear shock gives us 8.5" of fully adjustable travel and 9" travel up front. Plush thru the whoops!

azextreme
01-29-2007, 05:37 PM
So whats required to mod the swing for the 14" elka??? I called today but you guys were closed! and any mods to the front for the 9' travel or is that just the shocks??

azextreme
01-29-2007, 05:46 PM
also is it possible to run your set up but with floats? I called fox today they have 13" (3" of travel) off of a 300ex and 14.5" (3.7" of travel) off a banshee.

WMW-F4R
01-29-2007, 06:50 PM
Front Elkas:
We modify the steering arm to lessen the angle on the tie rods and raise the tie rod mount on the spindle...the 13.25" Elkas raise the the front approx. 1.5" and it binds up the steering when fully extended on some units. We hope to have new upper ball joints next week that will also help with this issue. The front shocks are available with compression and rebound adjustments or compression only.

Rear Elka:
We worked with Elka to develope a shock that would give us the travel we needed without raising the back end. We modify the swingarm with a new shock mount that improves the shock travel rate. Our shock is 14" eye to eye with compression and rebound adjustments.

As for your other shocks that may or may not work, I'm not sure, but would have to be sprung and valved for rider weight and ability...this could be difficult and costly and probably wouldn't work as well. I could probably get the Float on the rear to work if you were set on Fox.

Hope that helps.

quaddad69
02-01-2007, 04:52 PM
I would go with the Fox Floats. I am them on our typhoon and they work great!

azextreme
02-01-2007, 08:45 PM
what size are they and where did you get them from? also are they valved for the rider or you just adjust up to 150psi no matter what the weight is??

predator dad
02-02-2007, 02:49 AM
I have the fox float on the rear and 13 3/4 in elkas up front. My son seems to like the setup.

predator dad
02-02-2007, 02:50 AM
I have the fox float on the rear and 13 3/4 in elkas up front. My son seems to like the setup.

Bulletracn
03-12-2007, 08:02 PM
I bought Some Elka's and what they sent me were 13 1/4 fronts and a 10" for the rear. I have one of the first 20 shipped to the states, so they say. I have been having trouble with parts and upgrades and so on. My O.E.M front shock length is 12" from eye to eye and my rear shock measures 10 3/4 E.T.E. I put the fronts on just to see if they would work, and I can barely get them to compress let alone my 55 lb rider. What mod. should I make?

azextreme
03-13-2007, 08:51 PM
I now have the Elka's all the way around, But have the 14" long travel on order! I cant wait,I think I am more excited then my son is! The Elkas are great. But I think I'm gonna get a back up bike and set it up with the Fox floats.

leager-n-ky
11-29-2007, 02:29 PM
AS FAR AS THE FOX FLOATS COULD SOMEONE TELL ME WICH ONES I NEED FOR THE 125

azextreme
11-29-2007, 07:20 PM
Just to let you know most of the reading I have done on the Floats most end up getting Elkas after there floats purchase.

guy310
11-29-2007, 07:32 PM
Floats are klx 100 rear and 300ex fronts. Our fronts are setup at 55 psi in the front and I am not sure what the rear is set at.